背光模组LED侧照明微棱镜膜的研究

季振强; 董连和; 王丽; 吴博琦; 尹航

doi:null

您当前的位置：

首页 >

文章列表页 >

背光模组LED侧照明微棱镜膜的研究

器件物理及器件制备技术 | 更新时间：2020-08-12

- 背光模组LED侧照明微棱镜膜的研究
- Micro-prism film with LED side lighting in backlight module
- 液晶与显示 2014年29卷第4期页码：533-537
- 作者机构：
  
  长春理工大学光电工程学院,吉林长春,130021
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TN312+.8
- 收稿日期：2013-09-25，
  
  修回日期：2013-11-05，
  
  网络出版日期：2013-11-01，
  
  纸质出版日期：2014-08-05
- 稿件说明：
移动端阅览
季振强, 董连和, 王丽, 吴博琦, 尹航. 背光模组LED侧照明微棱镜膜的研究[J]. 液晶与显示, 2014,29(4): 533-537

JI Zhen-qiang, DONG Lian-he, WANG Li, WU Bo-qi, YIN Hang. Micro-prism film with LED side lighting in backlight module[J]. , 2014,29(4): 533-537
季振强, 董连和, 王丽, 吴博琦, 尹航. 背光模组LED侧照明微棱镜膜的研究[J]. 液晶与显示, 2014,29(4): 533-537 DOI：

JI Zhen-qiang, DONG Lian-he, WANG Li, WU Bo-qi, YIN Hang. Micro-prism film with LED side lighting in backlight module[J]. , 2014,29(4): 533-537 DOI：

摘要

在液晶显示器背光模组LED侧照明中，为了减小近光源处明暗相间非混光区对导光板有效均匀照明面积的影响，对导光板入光面处微结构进行研究。设计了一种具有阵列棱镜结构的微棱镜膜，在不改变LED与入光面距离以及相邻LED间距的前提下，将其贴附于导光板的入光面处。试验结果表明：当棱镜顶角为105时，入射光线的出射角度最大，微棱镜膜的散光作用可以将非混光区的宽度由原来4 mm减缩至2 mm。有效地增加了近光源处混光区域的面积，对于LED侧照明式背光模组入光面微结构的设计有一定的指导意义。

Abstract

In the LED side lighting of LCD(Liquid Crystal display)backlight module

in order to reduce the influence from the non-mixed area near the light source for the effective uniform illuminating area of the light guide plate

the micro structure on the incident surface of light guide plate is studied. A micro-prism film with prisms array is designed without changing the distance between LED and incident surface

as well as the spacing between adjacent LEDs

it is pasted on the incident surface of the light guide plate. The results show when the apex angle of prism is 105

the emission angle is the largest. The astigmatism of micro-prism film can reduce the non-light mixed area from original 4 mm to 2 mm. It increases the light mixing zone area near the light source effectively. This research is significant to the micro structure design on the incident surface of the side lighting backlight module.

关键词

Keywords

references

郝冬晶,钱可元,罗毅. 大尺寸LED背光源网点的设计及优化[J]. 液晶与显示,2011,26(5):598-603. Hao D J,Qian K Y,Lou Y.Design and optimization of dot pattern for large scale LED backlight unit [J]. Chinese Journal of Liquid Crystals and Displays,2011,26(5):598-603. (in Chinese)[2] Cheng Y. Progress in display technogies and the irapplications [J].Chinese Journal of Optics and Applied Optics, 2010,3(1):27-32.[3] 赵亚辉,范长江. 组合式发光二极管路灯反射器的设计[J]. 中国光学,2012,5(5):520-524. Zhao Y H,Fan C J.Design of combined reflectors used in LED street lamps [J]. Chinese Optics,2012,5(5):520-524. (in Chinese)[4] Teng T C,Kuo M F. Highly precise optical model for simulating light guide plate using LED light source [J]. Optics Express,2010,18(21):22208-22214.[5] 罗增昌.彩屏背光源设计规范.深圳:伟志电子有限公司,2006. Luo Z C.Code for design of screen back light source.Shen Zhen:Electronics Co.,Ltd,2006.(in Chinese)[6] 华广胜,布占场,郑效盼,等. 低功耗液晶电视LED背光源设计[J]. 液晶与显示,2011, 26(4):455-459. Hua G S,Bu Z C,Zheng X P,et al. Design of LED backlight module for low power LCD TV [J]. Chinese Journal of Liquid Crystals and Displays,2011, 26(4):455-459. (in Chinese)[7] Choi K M,Lee Y S,Lee S H,et al. Design and analysis of the lens converting the spot light into the line light //.The 23rd International Technical Conference on Circuits/Systems,Computers and Communications(ITC-CSCC),2008:1145-1148.[8] Kim Y C,Oh T S,Lee Y M. Optimized pattern design of light-guide plate (LGP)[J]. Optica Applicata,2011,41(4):863-872.[9] Wang Y J,Lu J G,Shieh H P D. A novel highly collimating backlight module using a double wedge-shaped light guide plate //SID Symposium Digest of Technical Papers,2012,43 (1):1305-1308.[10] 黄显川,叶志庭. 用于 LCD 背光模块的 LED 光源转成线光源设计研究[J]. 光学与光电技术,2007,5(2):8-11. Huang X C,Ye Z T. Design of LED light source transfer to line light source for LCD backlight module [J]. Optics & Optoelectronic Technology,2007,5(2):8-11. (in Chinese)[11] Chang L K. Light guide plate and backlight module:U.S,Patent 8,118,464,2012-2-21.[12] 周羲君,冯仕猛. 均匀照明 LED 背光板设计[J]. 液晶与显示,2012,27(6):774-779. Zhou X J,Feng S M. Design of high uniformity LED backlight [J].Chinese Journal of Liquid Crystals and Displays,2012,27(6):774-779. (in Chinese)[13] 魏正英,熊孝东,杜军,等.常温微压印中抗蚀剂流动的研究及工艺优化[J]. 光学精密工程,2010,18(8):1822-1832. Wei Z Y,Xiong X D,Du J, et al.Flow behavior of resist in room-temperature micro-imprinting and its process optimization [J]. Opt. Precision Eng.,2010,18(8):1822-1832.(in Chinese)[14] 赵亚辉,范长江. 组合式发光二极管路灯反射器的设计[J]. 中国光学,2012,5(5):520-524. Zhao Y H,Fan C J.Design of combined reflectors used in LED street lamps [J]. Chinese Optics,2012,5(5):520-524.(in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

背光模组复合光学膜片的应用

全微结构一体化背光模组设计

基于无缝平凹透镜阵列的LCD背光模组设计

液晶电视用低功耗LED背光模组设计

LCD导光板自由曲面微型槽结构设计与优化