高PS材料制备及工艺研究

张家祥; 王威; 王彦强; 焦宇; 周海龙; 张芳; 徐闪闪; 陈召; 覃一锋; 张文余; 黄东升; 陈思

doi:10.3788/YJYXS20193403.0236

您当前的位置：

首页 >

文章列表页 >

高PS材料制备及工艺研究

材料与器件 | 更新时间：2020-07-05

- 高PS材料制备及工艺研究
- Manufacture and process of high PS material
- 液晶与显示 2019年34卷第3期页码：236-240
- 作者机构：
  
  北京京东方光电科技有限公司, 北京 100176
- 作者简介：
  
  [ "张家祥(1985-), 男, 山东滨州人, 硕士, 工程师, 主要从事与液晶面板相关的技术研发工作。E-mail:zhangjiaxiang@boe.com.cn" ]
- 基金信息：
  
  京东方厚膜材料研发基金;Supported by High Thickness Material Research Fund of BOE
- DOI：10.3788/YJYXS20193403.0236
  中图分类号： TN141.9
- 收稿日期：2018-09-13，
  
  录用日期：2018-12-9，
  
  纸质出版日期：2019-03
- 稿件说明：
移动端阅览
张家祥, 王威, 王彦强, 等. 高PS材料制备及工艺研究[J]. 液晶与显示, 2019,34(3):236-240.

Jia-xiang ZHANG, Wei WANG, Yan-qiang WANG, et al. Manufacture and process of high PS material[J]. Chinese journal of liquid crystals and displays, 2019, 34(3): 236-240.
张家祥, 王威, 王彦强, 等. 高PS材料制备及工艺研究[J]. 液晶与显示, 2019,34(3):236-240. DOI： 10.3788/YJYXS20193403.0236.

Jia-xiang ZHANG, Wei WANG, Yan-qiang WANG, et al. Manufacture and process of high PS material[J]. Chinese journal of liquid crystals and displays, 2019, 34(3): 236-240. DOI： 10.3788/YJYXS20193403.0236.

摘要

本文对高膜厚PS材料进行了研究，通过工艺优化，成功在G5线实现了60~120

m的高PS。通过前烘工艺和固化工艺优化调整，得到了无气泡、膜面良好的高PS材料。本文还对曝光量对PS影响进行了研究，发现曝光量低于50 mJ时，PS材料无法有效成型；当曝光量达到150 mJ时，得到形貌良好，达到设计值的PS。最后还对不同基底高PS材料进行了研究，发现未进行增粘处理时，SiN基底粘附性良好，Mo基底还需继续优化处理。

Abstract

The high thickness PS material was studied

through process optimization

60~120

m high PS was prepared successfully in the G5 line. By tuning of VCD

softbake process and curing process

high PS material of no bubble and good membrane surface was obtained. The intensity of exposure influence on the PS was also studied in this paper. When lower than 50 mJ

PS material cannot shape effectively

when amount to 150 mJ

high PS with good appearance

to meet the design value

was received. Finally

the different base of high PS material was studied. When the base did not deal with tackifier

the adhesion of SiN basal was good

but the adhesion of Mo base still needed to optimize the processing.

关键词

Keywords

references

吕文明, 张红霞, 宋晓敏, 等.梯形凸起电极液晶变焦透镜[J].液晶与显示, 2018, 33(1):30-37.

LV W M, ZHANG H X, SONG X M, et al . Tunable liquid crystal lens with raised trapezoidal electrodes[J]. Chinese Journal of Liquid Crystals and Displays , 2018, 33(1):30-37. (in Chinese)

LI C T, LI Y, LIN H Y, et al . Design of polarization-insensitive multi-electrode GRIN lens with a blue-phase liquid crystal[J]. Optics Express , 2011, 19(18):17402-17407.

LI Y, WU S T. Polarization independent adaptive microlens with a blue-phase liquid crystal[J]. Optics Express , 2011, 19(9):8045-8050.

雷宇, 佟庆, 张新宇.使用梯度折射率液晶微透镜阵列的光场成像[J].红外与激光工程, 2017, 46(2):231-237.

LEI Y, TONG Q, ZHANG X Y. Light field imaging with a gradient index liquid crystal microlens array[J]. Infrared and Laser Engineering , 2017, 46(2):231-237. (in Chinese)

LI Q Y, JIAO Y C, ZHAO G. A novel microstrip rectangular-patch/ring-combination reflectarray element and its application[J]. IEEE Antennas and Wireless Propagation Letters , 2009, 8:1119-1122.

HU W, ISMAIL M Y, CAHILL R, et al . Liquid-crystal-based reflectarray antenna with electronically switchable monopulse patterns[J]. Electronics Letters , 2007, 43(14):744-745.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于聚合物突起的液晶透镜阵列

高电阻浮置电极液晶透镜的仿真研究

采用液晶透镜校正电润湿液体透镜调焦系统的单色像差

溶胶-凝胶法制备的用于模式控制型液晶透镜的AZO高电阻薄膜

方块电阻阶梯分布的模式控制液晶透镜的仿真