用于智能显示的相位型计算全息图的设计

张梦妮; 张锦; 蒋世磊; 孙国斌; 弥谦; 王震; 张强; 武耀霞

doi:10.3788/YJYXS20183303.0245

您当前的位置：

首页 >

文章列表页 >

用于智能显示的相位型计算全息图的设计

图像处理 | 更新时间：2020-07-06

- 用于智能显示的相位型计算全息图的设计
- Design of phase type computer-generated-hologram for intelligent display
- 液晶与显示 2018年33卷第3期页码：245-253
- 作者机构：
  
  西安工业大学光电工程学院, 陕西西安 710021
- 作者简介：
  
  [ "张梦妮(1993-), 女, 陕西西安人, 硕士研究生, 主要研究方向为微纳光学。E-mail:zmn032993@163.com" ]
  [ "张锦(1966-), 女, 博士, 研究员, 主要研究方向为微纳光学技术、先进光学制造、光学精密测量。E-mail:zhangjin@xatu.edu.cn" ]
- 基金信息：
  
  陕西省教育厅重点实验室科研计划(13JS038);陕西省科技厅重点实验室项目(2013SZS14-P01);西安工业大学校长科研基金(XAGDXJJ1303);Key Laboratory Research Plan of Education Department of Shaanxi Provincial Government(13JS038);Key Laboratory Project of Shaanxi Provincial Department of Science and Technology(2013SZS14-P01);President Research Fund of Xi'an Technological University(XAGDXJJ1303)
- DOI：10.3788/YJYXS20183303.0245
  中图分类号： O436;O438
- 收稿日期：2017-10-09，
  
  录用日期：2018-12-26，
  
  纸质出版日期：2018-03-05
- 稿件说明：
移动端阅览
张梦妮, 张锦, 蒋世磊, 等. 用于智能显示的相位型计算全息图的设计[J]. 液晶与显示, 2018,33(3):245-253.

Meng-ni ZHANG, jin ZHANG, Shi-lei JIANG, et al. Design of phase type computer-generated-hologram for intelligent display[J]. Chinese journal of liquid crystals and displays, 2018, 33(3): 245-253.
张梦妮, 张锦, 蒋世磊, 等. 用于智能显示的相位型计算全息图的设计[J]. 液晶与显示, 2018,33(3):245-253. DOI： 10.3788/YJYXS20183303.0245.

Meng-ni ZHANG, jin ZHANG, Shi-lei JIANG, et al. Design of phase type computer-generated-hologram for intelligent display[J]. Chinese journal of liquid crystals and displays, 2018, 33(3): 245-253. DOI： 10.3788/YJYXS20183303.0245.

摘要

介绍了一种基于相息图原理的用于智能显示的纯相位型计算全息图的设计方法

并在此基础上

以雪花图形和分划板图形为例

完成了全息元件实验样件的制作及全息再现实验

这种实时再现的图像可以用于智能显示。在已知记录介质折射率的情况下

通过控制纯相位型计算全息图记录介质表面微结构的宽度和高度来调制光波

得到所需图像。采用逐步迭代的傅里叶变换算法来获取纯相位型计算全息图的相位结构

为了降低相位型计算全息图的制作难度

提出量化数学模型

并对所设计的相位结构进行量化处理

给出了纯相位型计算全息图的4台阶浮雕型相位结构。全息元件的尺寸设定为6 mm×6 mm

工作波长为650 nm

衍射结构的最小特征尺寸为8

m。理论计算和模拟再现像的结果表明

在未考虑加工误差的条件下

所提供的这种用于智能显示的纯相位型计算全息图的设计方法是可行的。此方法可推广用于其它任意特定图案的纯相位型计算全息图的设计

也可用于设计具有光束整形功能的衍射光学元件

如离轴照明的光束的整形匀光器件等。用于智能显示时

用平行光照射制作的实验样件

只得到的单一的衍射图像

不存在其他衍射级次的图像

在考虑采用台阶量化结构和存在加工误差的情况下

衍射效率仍然很高。若改变设计的全息图相位的正负

并用平行光以特定的角度照射制作此相位型计算全息图

可用于全息瞄准。

Abstract

The design method of the pure-phase type computer-generated-hologram for intelligent display based on the principle of the kinoform has been introduced.On this basis

taking snowflake pattern and reticle pattern as examples

experimental samples of holography elements was developed

and holographic reconstruction is completed

real-time reconstruction images can be used for intelligent display.Method:The reconstruction images could be obtained by controlling the height and width of micro-structures on the surface of recording medium material with a certain refractive index.The iterative Fourier transform algorithm has been used to calculate the phase structure of the pure-phase type computer-generated-hologram.At the same time

the quantitative mathematical model has been given

and 4 steps relief structure have been obtained.The sizes of the pure-phase type computer-generated-hologram has been set to be 6 mm×6 mm

the working wavelength is 650 nm

the minimum feature size of the diffractive structures is 8

m.The theoretical calculation result and the reconstruction simulation result show that the design method of the pure-phase type computer-generated-hologram for intelligent display is feasible in the case of un-considering fabrication errors.This method can also be used to design the pure-phase type computer-generated-hologram of other specific patterns.It can also be used to design diffractive optical elements for beam shaping

such as the optical beam shaping and optical beam homogenizer of the off-axis illumination.The pure-phase computer-generated-hologram is illuminated by a plane wave for intelligent displays

the high diffraction efficiency could be obtained because a single diffraction image could be reconstructed without other diffraction images.The positive and negative of phase of the hologram is changed in this design

the hologram is illuminated by a plane wave at a specific angle

which can be used for holographic sight

关键词

Keywords

references

颜树华.衍射微光学设计[M].北京:国防工业出版社, 2011.

YAN S H. Design of Diffractive Micro-Optics [M].Beijing:National Defense Industry Press, 2011.(in Chinese)

虞祖良, 金国藩.计算机制全息图[M].北京:清华大学出版社, 1984.

YU Z L, JIN G F.Computer-Generated-Hologram[M].Beijing:Tsinghua University Press, 1984.(in Chinese)

黄向阳, 陈惠芬, 应萱同, 等.一种新的纯位相型计算全息图及其应用[J].光学学报, 1988, 8(2):162-165.

HUANG X Y, CHEN H F, YING X T, et al.A new proposal for phase-only CGH and its application[J].Acta Optica Sinica, 1988, 8(2):162-165.(in Chinese)

陈岩松, 王玉堂, 李秀英, 等.一种相位型再现元件-相息图[J].中国激光, 1979, 6(10):28-33.

CHEN Y S, WANG Y T, LI X Y, et al.A wavefront reconstructing device-kinoform[J].Chinese Journal of Lasers, 1979, 6(10):28-33.(in Chinese)

沐仁旺, 周进, 刘建宏, 等.用二元光学技术制作反射式相息图[J].光学学报, 1998, 18(12):1746-1750.

MU R W, ZHOU J, LIU J H, et al.Reflective kinoform fabrication by binary optical technique[J].Acta Optica Sinica, 1998, 18(12):1746-1750.(in Chinese)

李勇, 王辉, 金洪震.一种由全息图制作相息图的方法[J].红外与微光, 2005, 35(10):765-767.

LI Y, WANG H, JIN H Z.A new approach for making kinoform from hologram[J].Laser & Infrared, 2005, 35(10):765-767.(in Chinese)

裴闯, 蒋晓瑜, 王加, 等.一种三维物体相息图的迭代计算方法[J].光子学报, 2013, 42(3):348-353.

PEI C, JIANG X Y, WANG J, et al.An Iterative algorithm for kinoform computation of 3D object[J].Acta Photonica Sinica, 2013, 42(3):348-353.(in Chinese)

刘伯晗, 吴丽莹, 张健.一种用于衍射光元件优化设计的快速算法的研究[J].光学学报, 2007, 27(2):219-224.

LIU B H, WU L Y, ZHANG J.Fast phases retrieval for diffraction optical devices optimal design[J].Acta Optica Sinica, 2007, 27(2):219-224.(in Chinese)

庞辉, 应朝福, 范长江, 等.用于光束整形的衍射光学元件设计的混合算法[J].光子学报, 2010, 39(6):977-981.

PANG H, YING C F, FAN C J, et al.Design diffractive optical elements for beam shaping with hybrid algorithm[J].Acta Photonica Sinica, 2010, 39(6):977-981.(in Chinese)

ZHANG Y P, ZHANG J Q, LIU Y, et al.Research on a fast algorithm of three-dimensional CGH[J].Optik-International Journal for Light and Electron Optics, 2014, 125(12):2727-2730.

王成伟.射手威力倍增器-全息衍射瞄准镜[J].现代兵器, 2001(12):20-21.

WANG C W.Sagittarius power multiplier-Holographic sight[J].Modern Weaponity, 2001(12):20-21.(in Chinese)

金国藩, 严瑛白, 邬敏贤, 等.二元光学[M].北京:国防工业出版社, 1998.

JIN G F, YAN Y B, WU M X, et al.Binary Optics[M].Beijing:National Defense Industry Press, 1998.(in Chinese)

TANQ F, YAN Y B, JIN G F, et al. Continuous-phase diffractive optical element for realizing uniform illumination on the plane nonperpendicular to the optical axis[C]//Proceedings of SPIE-Gradient Index, Miniature, and Diffractive Optical Systems. Denver, CO, United States: SPIE, 1999, 3778: 114-119.

张巍, 巩岩.投影光刻离轴照明用衍射光学元件设计[J].光学精密工程, 2008, 16(11):2081-2086.

ZHANG W, GONG Y.Design of diffractive optical elements for off-axis illumination in projection lithography[J].Optics and Precision Engineering, 2008, 16(11):2081-2086.(in Chinese)

石鹏, 刘强, 曹国威, 等.衍折射设计用于均匀照明的衍射光学器件[J].强激光与粒子束, 2009, 21(8):1165-1169.

SHI P, LIU Q, CAO G W, et al.Diffractive-refractive method for design of diffractive optical elements for uniform illumination[J].High Power Laser and Particle Beams, 2009, 21(8):1165-1169.(in Chinese)

蔡晓鸥.全息图的计算机模拟再现[J].应用激光, 2001, 21(3):185-187.

CAI X O.Image reproduction of hologram by computer calculation[J].Applied Laser, 2001, 21(3):185-187.(in Chinese)

付胜豪, 鲍绪良, 王元庆, 等.基于衍射光场的全息图计算机生成[J].计算机与现代化, 2012(4):171-174, 222.

FU S H, BAO X L, WANG Y Q, et al.Computer-generated hologram based on diffraction[J].Computer and Modernization, 2012(4):171-174, 222.(in Chinese)

赵付丽, 章鹤龄, 邢敬婷, 等.基于Matlab的计算全息图的制作与数字再现的研究[J].应用光学, 2009, 30(6):953-957.

ZHAO F L, ZHANG H L, XING J T, et al.Realization and digital reconstruction of computer-generated hologram based on Matlab[J].Journal of Applied Optics, 2009, 30(6):953-957.(in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

具有视角控制特性的液晶光学器件研究进展

TFT-LCD技术发展趋势浅析