聚合物分散型液晶结构紫外光稳定性分析

蒋圣评; 李承璋; 赖威宏; 赵宏昌; 陈君维; 林宗贤; 洪子圣

doi:10.3788/YJYXS20163102.0125

您当前的位置：

首页 >

文章列表页 >

聚合物分散型液晶结构紫外光稳定性分析

特邀报告 | 更新时间：2020-08-12

- 聚合物分散型液晶结构紫外光稳定性分析
- Ultraviolet light stability of polymer structure based on polymer dispersed liquid crystal
- 液晶与显示 2016年31卷第2期页码：125-130
- 作者机构：
  
  1. 中山大学电机工程学系,台湾高雄,80424
  2. 中山大学光电工程学系,台湾高雄,80424
- 作者简介：
- 基金信息：
- DOI：10.3788/YJYXS20163102.0125
  中图分类号： TN104.3
- 收稿日期：2015-11-05，
  
  修回日期：2015-11-17，
  
  纸质出版日期：2016-02-05
- 稿件说明：
移动端阅览
蒋圣评, 李承璋, 赖威宏等. 聚合物分散型液晶结构紫外光稳定性分析[J]. 液晶与显示, 2016,31(2): 125-130

CHIANG Sheng-ping, LI Cheng-chang, LAI Wei-hung etc. Ultraviolet light stability of polymer structure based on polymer dispersed liquid crystal[J]. , 2016,31(2): 125-130
蒋圣评, 李承璋, 赖威宏等. 聚合物分散型液晶结构紫外光稳定性分析[J]. 液晶与显示, 2016,31(2): 125-130 DOI： 10.3788/YJYXS20163102.0125.

CHIANG Sheng-ping, LI Cheng-chang, LAI Wei-hung etc. Ultraviolet light stability of polymer structure based on polymer dispersed liquid crystal[J]. , 2016,31(2): 125-130 DOI： 10.3788/YJYXS20163102.0125.

摘要

聚合物分散型液晶组件技术是市面上常用的散射式光开关系统

且常常应用于具隐私保护性之电控切换窗户中。然而对于室外的应用

属于有机高分子材料的液晶材料与聚合物结构对于照射紫外光之稳定性与耐受性值得被讨论

尤其是较少被讨论之高分子聚合物结构的影响。本研究主要探讨不同聚合物结构之聚合物分散型液晶组件在紫外光照射下光电特性的变化

期待可以了解聚合物结构特性随曝光时间的变化并提出适当之改善方法。本实验藉由选择具有高紫外光稳定性之主体液晶搭配紫外固化胶调配聚合物分散型液晶预聚物

分别探讨不同固化胶比例与光强度等固化条件下

组件照射紫外光后对于光电特性造成的影响

以此了解各种聚合物形貌照射紫外光后之光电特性变化。实验结果显示

照射紫外光后

各种聚合物分散型液晶组件之临界电压仅仅些微提升

但下降时间剧烈地提高

以聚合物比例 35%、固化强度 2 mW/cm

为例

临界电压从15.57 V些微提升至18.18 V

下降时间从195.12 ms 大幅提升至925.26 ms。此外

本研究亦发现相对于照射前

照射紫外光后之组件的下降时间对于电压施加时间长短相当敏感

且此现象可藉由调整固化光强度与固化胶浓度有抑制之趋势。本研究呈现了各种聚合物分散型液晶组件在照射紫外光后光电特性的变化

并了解聚合物结构的特性变化的影响。

Abstract

Polymer dispersed liquid crystal (PDLC) is a commercially available technique which is already utilized to scattering mode light switching and also developed in electrically privacy-switching window. However

there is still essential to be discussed that the ultraviolet (UV) stability and tolerability in organic liquid crystal (LC) materials and polymer structure for outdoor applications

especially the rarely discussed polymer structure. The electro-optical (E-O) effects of UV light-irradiated PDLC in different curing condition are compared in this work. The understanding of UV stability in polymer structure and the improved methods are expected. The precursor is prepared by the high UV stability host LC and optical adhesive (OA). In order to realize the effect between different polymer structure morphology

the proportion of the optical adhesive and the curing intensity are discussed in this work. The results revealed that the threshold voltage only slightly rose but the response time dramatically increased. For example

the threshold voltage slightly rose from 15.57 V to 18.18 V

the field off time dramatically increased from 195.12 ms to 925.26 ms under 35% OA concentration and 2 mW/cm

curing intensity. In addition

it is observed that the response time after UV irradiation is more sensitive to the voltage duration time than before. This phenomenon can be suppressed by controlling the curing intensity and OA concentration. This work demonstrated the variation of E-O effect in different type of PDLC after irradiating UV light. The influence from polymer structure is realized.

关键词

Keywords

references

CRAIGHEAD H G, CHENG J L, HACKWOOD S. New display based on electrically induced index-matching in an inhomogeneous medium [J]. Applied Physics Letters, 1982, 40(1): 22-24.

HAN J W, KANG T J, PARK G. Effects of composition, curing-time, and temperature on the electro-optical characteristics of polymer-dispersed liquid crystal films [J].Journal of the Korean Physical Society, 2000, 36(3): 156-163.

FUH Y G, LIN T H. Electrically switchable spatial filter based on polymer-dispersed liquid crystal film [J]. Journal of Applied Physics, 2004, 96(10): 5402-5404.

BOUTEILLER L, BARNY P L. Polymer-dispersed liquid crystals: preparation, operation and application [J]. Liquid Crystals, 1996, 21(2): 157-174.

DOANE J W, GOLEMME A, WEST J L, et al. Polymer dispersed liquid crystals for display application [J]. Molecular Crystals and Liquid Crystals Incorporating Nonlinear Optics, 1988, 165(1): 511-532.

CRAWFORD G P. Flexible Flat Panel Displays [M]. UK: John Wiley & Sons Inc, 2005.

LI J, BAIRD G, LIN Y H, et al. Refractive-index matching between liquid crystals and photopolymers [J]. Journal of the Society for Information Display, 2005, 13(12): 1017-1026.

王永青,贵丽红,丰景义,等.添加剂对高双折射液晶紫外稳定性影响[J].液晶与显示,2015,30(3):404-409. WANG Y Q, GUI L H, FENG J Y, et al. Effect of additive agents on ultraviolet stability of high birefringence liquid crystals [J]. Chinese Journal of Liquid Crystals and Displays, 2015, 30(3): 404-409. (in Chinese)

WEN C H, GAUZA S, WU S T. Ultraviolet stability of liquid crystals containing cyano and isothiocyanato terminal groups [J]. Liquid Crystals, 2004, 31(11): 1479-1485.

LIN P T, WU S T, CHANG C Y, et al. UV stability of high birefirngence liquid crystals [J]. Molecular Crystals and Liquid Crystals, 2004, 411(1): 243-253.

YOUSIF E, HADDAD R. Photodegradation and photostabilization of polymers, especially polystyrene: review[J]. SpringerPlus, 2013, 2: 398.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据