基于馈通电压自动补偿的OLED电性能测试波形设计研究

刘志军; 侯红兵; 李金泰; 詹家豪

doi:10.3788/YJYXS20153002.0296

您当前的位置：

首页 >

文章列表页 >

基于馈通电压自动补偿的OLED电性能测试波形设计研究

器件驱动与控制 | 更新时间：2020-08-12

- 基于馈通电压自动补偿的OLED电性能测试波形设计研究
- Design of OLED shorting bar testing waveform based on feed through voltage compensation principle
- 液晶与显示 2015年30卷第2期页码：296-299
- 作者机构：
  
  1. 广州航海学院船舶工程系,广东广州,510725
  2. 惠州市仲恺高新技术投资控股有限公司,广东惠州,516006
- 作者简介：
- 基金信息：
  
  2014年广东省教育厅科技创新项目(No.2013KJCX0195)();广东省现代信息服务业发展专项资金项目(No.GDEID2011IS061)()
- DOI：10.3788/YJYXS20153002.0296
  中图分类号： TN321+.5
- 收稿日期：2014-03-21，
  
  修回日期：2014-04-18，
  
  纸质出版日期：2015-04-05
- 稿件说明：
移动端阅览
刘志军, 侯红兵, 李金泰, 詹家豪. 基于馈通电压自动补偿的OLED电性能测试波形设计研究[J]. 液晶与显示, 2015,30(2): 296-299

LIU Zhi-jun, HOU Hong-bing, LI Jin-tai, ZHAN Jia-hao. Design of OLED shorting bar testing waveform based on feed through voltage compensation principle[J]. , 2015,30(2): 296-299
刘志军, 侯红兵, 李金泰, 詹家豪. 基于馈通电压自动补偿的OLED电性能测试波形设计研究[J]. 液晶与显示, 2015,30(2): 296-299 DOI： 10.3788/YJYXS20153002.0296.

LIU Zhi-jun, HOU Hong-bing, LI Jin-tai, ZHAN Jia-hao. Design of OLED shorting bar testing waveform based on feed through voltage compensation principle[J]. , 2015,30(2): 296-299 DOI： 10.3788/YJYXS20153002.0296.

摘要

常规馈通电压计算原理涉及到OLED体的电容值

不同型号OLED产品电容值是个变量

为了得到最佳的电容值

OLED制造企业测试部门需做大量的验证实验。本文直接通过栅极电压上拉使OLED体的储存电容产生馈通电压来补偿栅极电压关闭时栅极和漏极之间寄生电容产生的馈通电压

无需测量OLED体的电容值和修正

com

值即可补偿栅极电压关闭时栅极和漏极之间的寄生电容产生的馈通电压。实验结果表明

基于馈通电压自动补偿原理设计的Shorting Bar Test Waveform与V

com

人工修正原理设计的电性能测试波形的检测效果一致

而对不同缺陷的检测率有微小差异。

Abstract

The conventional calculation principle for the feed through voltage relates to capacitance values of OLED body

and capacitance values of different OLED products is variable. A lot of experiments must be done by testing department of OLED manufacturing enterprise in order to get the best capacitance values of OLED body. This paper directly pulls up gate voltage

and then the storage capacitor of OLED body produces a feed through voltage to compensate the feed through voltage generated by the parasitic capacitance between the gate and the drain as the gate voltage closing. Experiment result shows that the total detection rate using the testing waveform based on automatic compensation principle or conventional compensation is consistent

and there is little difference on the detection rate of different defects.

关键词

Keywords

references

李拥军,于涛,侯文卓,等.液晶测试信号源的设计与实现[J]. 液晶与显示, 2006,21(1): 73-76. Li Y J, Yu T, Hou W Z, et al. Design and implementation of a signal generator for liquid crystal module testing[J]. Chinese Journal of Liquid Crystals and Displays,2006,21(1): 73-76.(in Chinese)[2] 唐惠玲,徐虎,翁文威,等.测试参数可视化设置的TFT-LCD电性能检测系统设计[J]. 液晶与显示,2012, 12(6):856-860. Tang H L,Xu H,Qiu X B. Design of electric performance testing system for TFT-LLCD with visual parameter configuration [J]. Chinese Journal of Liquid Crystals and Displays,2012, 12(6):856-860. (in Chinese)[3] 高鸿锦,董友梅.液晶与平板显示技术 [M].北京:北京邮电大学出版社, 2007:202-232. Gao H J, Dong Y M. LCD and Panel Display Technology [M].Beijing: Beijing University of Posts and Telecommunications Press, 2007:202-232. (in Chinese)[4] Meinstein K, Ludden C, Hagge M. et al. A low-voltage source driver for column inversion applications [C]//SID'96 Digest,San Diego,USA:SID,1996:255-258.[5] 王摇丽,吴晓明,华玉林,等. 插入电荷控制层对蓝色OLED发光性能的提高[J]. 发光学报, 2014,35(1):84-89. Wang L, Wu X M, Hua Y L. Improvement of performance of a blue organic light-emitting diode by inserting charge control layers [J].Chinese Journal of Luminescence, 2014,35(1):84-89. (in Chinese)[6] International Electro technical Commission. IEC61747-6-2004. Liquid crystal and solid-state display devices, Part 6:Measuring methods for liquid crystal modules-Transmissive type [S]. IEC,2004.[7] 唐惠玲,刘汉瑞,刘志军.一种TFT LCD可编程综合性能电测仪:中国,ZL200920052079.7[P].2009. Tang H L,Liu H R, Liu Z J. A kind of TFT LCD electric performance testing instruments:China, ZL200920052079.7[P]. 2009.(in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Mini LED和OLED电视在不同环境光强度下的对比度和人眼感知实验研究

隧道磁阻传感器在OLED电流检测中的应用

极性相反结构的micro-LED和OLED混合集成显示器件的驱动

喷墨打印OLED发光层像素坑内成膜控制方法

OLED器件电学物理理论综述