小尺寸FFS产品Zara分析与改善研究

刘利萍; 吴涛; 刘俊豪; 叶超前; 陆相晚; 崔完鎔

doi:10.3788/YJYXS20142905.0697

您当前的位置：

首页 >

文章列表页 >

小尺寸FFS产品Zara分析与改善研究

器件物理及器件制备技术 | 更新时间：2020-08-12

- 小尺寸FFS产品Zara分析与改善研究
- Analysis and improvement of small size FFS mode Zara defect
- 液晶与显示 2014年29卷第5期页码：697-702
- 作者机构：
  
  1. 合肥鑫晟光电科技有限公司, 安徽合肥 230012
  2. 合肥京东方光电科技有限公司,安徽合肥,230012
- 作者简介：
- 基金信息：
- DOI：10.3788/YJYXS20142905.0697
  中图分类号： TN87
- 收稿日期：2014-07-19，
  
  修回日期：2014-08-12，
  
  网络出版日期：2013-10-08，
  
  纸质出版日期：2014-10-05
- 稿件说明：
移动端阅览
刘利萍, 吴涛, 刘俊豪, 叶超前, 陆相晚, 崔完鎔. 小尺寸FFS产品Zara分析与改善研究[J]. 液晶与显示, 2014,29(5): 697-702

LIU Li-ping, WU Tao, LIU Jun-hao, YE Chao-qian, LU Xiang-wan, CUI Wan-rong. Analysis and improvement of small size FFS mode Zara defect[J]. , 2014,29(5): 697-702
刘利萍, 吴涛, 刘俊豪, 叶超前, 陆相晚, 崔完鎔. 小尺寸FFS产品Zara分析与改善研究[J]. 液晶与显示, 2014,29(5): 697-702 DOI： 10.3788/YJYXS20142905.0697.

LIU Li-ping, WU Tao, LIU Jun-hao, YE Chao-qian, LU Xiang-wan, CUI Wan-rong. Analysis and improvement of small size FFS mode Zara defect[J]. , 2014,29(5): 697-702 DOI： 10.3788/YJYXS20142905.0697.

摘要

通过对大量Zara样品进行分析，构建了不良现象--对应原因（Phenomenon-Cause）的4种理论模式，并基于此理论设计了改善Zara的实验。通过分析发现：约5 m左右可移动的Zara主要为摩擦工艺过程产生的碎屑；10~25 m按压不动的Zara主要为取向膜涂覆过程中的颗粒引起；轮廓清晰尺寸较大的Zara主要来自环境颗粒；无清晰轮廓且体积较大的 Zara主要为摩擦取向失效形成的岛状漏光。为降低Zara不良进行实验，结果显示：增加取向膜在基板上的覆盖率以及变更彩膜涂层材料可有效降低Zara不良的发生率；此外，减小柱状隔垫物的坡度角度能够从源头上有效防止Zara的产生。Zara不良的研究与改善提升了小尺寸FFS产品的良率5%以上，为企业的稳定高效生产奠定了基础。

Abstract

By analyzing massive Zara samples

four theoretical modes were created to illustrate the relationship of the classified Phenomenon and appropriate cause

and on this basis

experiments were designed to reduce the zara defect. We found that the floating zara with the size of about 5 m was mainly the chip caused by rubbing process; the irremovable zara with the size between 10 m and 25 m was mainly caused by alignment film coating; the large size zara with a clear outline was mainly environmental particle

while the large size zara with blurry outline was mainly domain leakage because of orientation failure. The experiments were designed to reduce the Zara defect and the result showed that after improving the alignment coverage and changing CF OC material

zara defect was obviously reduced. Furthermore diminished CF profile angle can effectively avoid Zara procreation at the source. The research and improvement of zara defect raised the product yield of more than 5%

laid the foundation for a stable and efficient production of enterprises.

关键词

Keywords

references

车春城. 广视角FFS技术CELL研究与设计[D].成都:电子科技大学, 2007. Che C C. Wide angle FFS technology research and design of CELL[D].Chengdu:University of Electronic Science and Technology, 2007.(in Chinese)[2] 马群刚.TFT-LCD原理与设计[M]. 北京:电子工业出版社,2011. Ma Q G.Theory and Design of TFT-LCD[M]. Beijing: Electronic Industry Press,2011. (in Chinese)[3] 程石,王涛,张敏,等. TFT-LCD中隔垫物密度与Push Mura和低温气泡的关系[J]. 液晶与显示, 2011, 26(5):604-607. Cheng S,Wang T,Zhang M,et al.Relationship of spacer density with Push Mura and cold bubble in TFT-LCD[J].Chinese Journal of Liquid Crystals and Displays,2011, 26(5): 604-607. (in Chinese)[4] 史秋飞,郑英花,朱載榮,等. 边角Zara Domain及其改善研究[J]. 液晶与显示, 2012,27(6):771-773. Shi Q F,Zheng Y H,Zhu Z R,et al.Improvement of corner Zara Domain[J].Chinese Journal of Liquid Crystals and Displays,2012, 27(6): 771-773. (in Chinese)[5] 于涛,陈晟,储培鸣,等. IPS液晶取向膜表面光学各向异性DΔ的研究[J]. 液晶与显示, 2012,27(3): 292-296. Yu T,Chen S,Chu P M,et al.Optic anisotropy DΔ of rubbed polyimide film for IPS liquid crystal alignment[J].Chinese Journal of Liquid Crystals and Displays, 2012, 27(3): 292-296. (in Chinese)[6] 石天雷,杨国波,程石,等. Zara漏光和Rubbing Mura改善研究[J]. 液晶与显示, 2012,27(2):208-211. Shi T L,Yang G B,Cheng S,et al.Zara and Rubbing Mura research[J].Chinese Journal of Liquid Crystals and Displays,2012, 27(2): 208-211. (in Chinese)[7] 刘锋,于凯,李相津,等. TFT-LCD 生产中毛刷清洗工艺的研究[J]. 现代显示, 2007(8): 54-56. Liu F, Yu K,Li X J,et al.Brush cleaning process analysis in TFT-LCD industry[J].Advanced Display,2007(8):54-56.(in Chinese)[8] 车春城,王丹,李军建. TFT-LCD取向层工艺及其关键参数[J]. 现代显示, 2006(9):20-23. Che C C,Wang D,Li J J.TFT-LCD's oriented layer technology and it's key parameters[J].Advanced Display,2006(9):20-23.(in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

TFT-LCD表面Mura缺陷的AOI检测研究进展

TFT-LCD用黑色光刻胶材料对曝光过程Mark读取的影响

TFT-LCD中电容对公共电压的影响

基于有效背景重构和对比度增强的Mura缺陷检测

TFT-LCD一种绿Mura机理分析和改善