Yu G, Gao J, Hummelen J C, et al. Polymer photovoltaic cells:enhanced efficiencies via a network of internal donor-acceptor heterojunctions [J]. Science, 1995, 270(5243):1789-1791.[2] Liang Y Y, Xu Z, Xia J B, et al. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4% [J]. Adv. Mater., 2010, 22(20): E135-E138.[3] Li G, Shrotriya V, Huang J S, et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends [J]. Nat. Mater., 2005, 4(11): 864-868.[4] Scharber M C, Whlbacher D, Koppe M, et al. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency [J]. Adv. Mater., 2006, 18(6) 789-794.[5] Brabec C J, Gowrisanker S, Halls J J M, et al. Polymer-fullerene bulk-heterojunction solar cells [J]. Adv. Mater., 2010, 22(34): 3839-3856.[6] Seemann A, Sauermann T, Lungenschmied C, et al. Reversible and irreversible degradation of organic solar cell performance by oxygen [J]. Sol. Energy, 2011, 85(6): 1238-1249.[7] Yang X N, Van Duren J K J, Janssen R A J, et al. Morphology and thermal stability of the active layer in poly(phenylenevinylene)/methanofullerene plastic photovoltaic devices [J]. Macromolecules, 2004, 37 (6): 2151-2158.[8] Thompson B C, Frechet J M J. Polymer-fullerene composite solar cells [J]. Angew. Chem. Int. Ed., 2008, 47(1): 58-77.[9] 景亚霓, 胡文华, 张平, 等. 喷墨印刷沉积的PEDOT/PSS薄膜导电性能 [J]. 液晶与显示, 2010, 25(5): 656-660.[10] Choulis S A, Choong V E, Patwardhan A, et al. Interface modification to improve hole-injection properties in organic electronic devices [J]. Adv. Funct. Mater., 2006, 16(8): 1075-1080.[11] Li G, Yao Y, Yang H, et al. "Solvent annealing" effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes [J]. Adv. Funct. Mater., 2007, 17(10): 1636-1644.