MacDiarmid A. Synthetic metals:a novel role for organic polymers [J]. Synth. Met., 2001, 125(1):11-22.[2] Heeger A, Sariciftci N, Namdas E. 半导性与金属性聚合物 [M]. 北京:科学出版社,2010.[3] Elschner A, Kirchmeyer S, Lovenich W, et al. PEDOT:Principles and applications of an intrinsically conductive polymer [M]. Boca Raton, US:CRC Press, 2011.[4] Reynolds J. Conducting polymer electrochemistry:From polyacetylene batteries to supercapacitors and electrochromic displays.[C]//Abstr. Paper. Am. Chem. Soc.,Philadelphia, US:American Chemical Society,2008:236.[5] Katz H, Searson P, Poehler T. Batteries and charge storage devices based on electronically conducting polymers [J]. J. Mater. Res., 2010, 25(8):1561-1574.[6] Heeger A. Semiconducting polymers:the third generation [J]. Chem. Soc. Rev., 2010, 39(7):2354-2371.[7] Zhong C, Duan C, Huang F, et al. Materials and devices toward fully solution processable organic light-emitting diodes [J]. Chem. Mater., 2011, 23(3):326-340.[8] Dennler G, Sariciftci N S. Flexible conjugated polymer-based plastic solar cells:from basics to applications [J]. Proc. IEEE., 2005, 93(8):1429-1439.[9] Huang J, Miller P, de Mello J, et al. Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films [J]. Synth. Met., 2003, 139(3):569-572.[10] Jonas F, Kraft W. New polythiophene dispersions, their preparation and their use, Germany:EP 0440957B1 . 1996-03-27.[11] Nguyen T, de Vos S. An investigation into the effect of chemical and thermal treatments on the structural changes of poly(3,4-ethylenedioxythiophene)/polystyrenesulfonate and consequences on its use on indium tin oxide substrates [J]. App. Surf. Sci., 2004, 221(1-4):330-339.[12] MacDiarmid A, Epstein A. The concept of secondary doping as applied to polyaniline [J]. Synth. Met., 1994, 65(2-3):103-106.[13] Pettersson L, Ghosh S, Inganas O. Optical anisotropy in thin films of poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) [J]. Org. Elect., 2002, 3(3-4):143-148.[14] Josson S, Birgerson J, Crispin X, et al. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films [J]. Synth. Met., 2003, 139(1):1-10.[15] Timpanaro S, Kemerink M, Touwslager F, et al. Morphology and conductivity of PEDOT/PSS films studied by scanning-tunneling microscopy [J]. Chem. Phys. Lett., 2004, 394(4-6):339-343.[16] Fan B, Mei X, Ouyang J. Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films by adding anionic surfactants into polymer solution [J]. Macromolecules, 2008, 41(16):5971-5973.[17] Vosgueritchian M, Lipomi D, Bao Z. Highly conductive and transparent PEDOT:PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes [J]. Adv. Funct. Mater., 2012, 22(2):421-428.[18] Alemu D, Wei H, Ho K, et al. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells [J]. Energ. Environ. Sci., 2012, 5(11):9662-9671.[19] Kim Y, Sachse C, Machala M, et al. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells [J]. Adv. Funct. Mater., 2011, 21(6):1076-1081.[20] Y. K, Jung J, Lee D, et al. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents [J]. Synth. Met., 2002, 126(2-3):311-316.[21] Lee C, Kim J, Lee D, et al. Flexible and transparent organic film speaker by using highly conducting PEDOT/PSS as electrode [J]. Synth. Met., 2003, 139(2):457-461.[22] Yan H, Okuzaki H. Effect of solvent on PEDOT/PSS nanometer-scaled thin films:XPS and STEM/AFM studies [J]. Synth. Met., 2009, 159(21-22):2225-8.[23] Takano T, Masunaga H, Fujiwara A, et al. PEDOT nanocrystal in highly conductive PEDOT:PSS Ppolymer films [J]. Macromolecules, 2012, 45(9):3859-3865.[24] Okuzaki H, Harashina Y, Yan H. Highly conductive PEDOT/PSS microfibers fabricated by wet-spinning and dip-treatment in ethylene glycol [J]. Eur. Polym. J., 2009, 45(1):256-261.[25] Xia Y, Ouyang J. Significant different conductivities of the two grades of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), clevios p and clevios PH1000, arising from different molecular weights [J]. ACS App. Mater. Inter., 2012, 4(8):4131-4140.[26] Xia Y, Sun K, Ouyang J. Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells [J]. Energ. Environ. Sci., 2012, 5(1):5325-5332.[27] Ouyang J, Xu Q, Chu C-W, et al. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment [J]. Polymer, 2004, 45(25):8443-8450.[28] Ouyang J, Chu C W, Chen F C, et al. Polymer optoelectronic devices with high-conductivity poly(3,4-ethylene-dioxythiophene) Anodes [J]. J. Macromol. Sci. A, 2004, 41(12):1497-1511.[29] Chen J G, Wei H Y, Ho K C. Using modified poly(3,4-ethylene dioxythiophene):Poly(styrenesulfonate) film as a counter electrode in dye-sensitized solar cells [J]. Sol. Energ. Mater. Sol. Cell., 2007, 91(15-16):1472-1477.[30] Lai S, Chan M, Fung M, et al. Concentration effect of glycerol on the conductivity of PEDOT film and the device performance [J]. Mater. Sci. Eng., 2003, B104(1-2):26-30.[31] Lim J, Cho J, Park Y, et al. Solvent effect of inkjet printed source/drain electrodes on electrical properties of polymer thin-film transistors [J]. App. Phys. Lett., 2006, 88(8):0821102.[32] Na S I, Wang G, Kim S S, et al. Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells [J]. J. Mater. Chem., 2009, 19(47):9045-9053.[33] Kang K, Chen Y, Han K, et al. Conductivity enhancement of conjugated polymer after HCl-methanol treatment [J]. Thin Solid Film., 2009, 517(20):5909-5912.[34] Xia Y, Ouyang J. Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids [J]. ACS App. Mater. Inter., 2010, 2(2):474-483.[35] Xia Y, Zhang H, Ouyang J. Highly conductive PEDOT:PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells [J]. J. Mater. Chem., 2010, 20(43):9740-9747.[36] Dobbelin M, Marcilla R, Salsamendi M, et al. Influence of ionic liquids on the electrical conductivity and morphology of PEDOT:PSS films [J]. Chem. Mater., 2007, 19(9):2147-2149.[37] Dobbelin M, Marcilla R, Tollan C, et al. A new approach to hydrophobic and water-resistant poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) films using ionic liquids [J]. J. Mater. Chem., 2008, 18(44):5354-5358.[38] Xia Y, Ouyang J. Salt-induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) [J]. Macromolecules, 2009, 42(12):4141-4147.[39] Zanaridi C, Terzi F, Pigani L, et al. Development and characterisation of a novel composite electrode material consisting of poly(3,4-ethylenedioxythiophene) including Au nanoparticles [J]. Electrochim. Acta, 2008, 53(11):3916-3923.[40] Terzi F, Zanaridi C, Martina V, et al. Electrochemical, spectroscopic and microscopic characterisation of novel poly(3,4-ethylenedioxythiophene)/gold nanoparticles composite materials [J]. J. Electroanal. Chem., 2008, 619-620:75-82.[41] Lee M, Kim B, Nam J, et al. In-situ formation of gold nanoparticles/conducting polymer nanocomposites [J]. Mol. Cryst. Liq. Cryst., 2003, 407(1):1-6.[42] Pacios R, Marcilla R, Pozo-Gonzalo C, et al. Combined electrochromic and plasmonic optical responses in conducting polymer/metal nanoparticle films [J]. J. Nanosci. Nanotech., 2007, 7(8):2938-2941.[43] Nagata A, Oku T, Akiyama T, et al. Effects of Au nanoparticle addition to hole transfer layer in organic photovoltaic cells based on phthalocyanines and fullerene [J]. J. Nanotech., 2011, 2011:869596.[44] Chen F C, Wu J L, Lee C L, et al. Plasmonic-enhanced polymer photovoltaic devices incorporating solution-proces-sable metal nanoparticles [J]. App. Phys. Lett., 2009, 95(1):013305.[45] Semaltianos N, Perrie W, Romani S, et al. Polymer-nanoparticle composites composed of PEDOT:PSS and nano-particles of Ag synthesised by laser ablation [J]. Colloid Polym. Sci., 2012, 290(3):213-220.[46] Melendez R, Moreno K, Moggio I, et al. On the influence of silver nanoparticles size in the electrical conductivity of PEDOT:PSS [J]. Mater. Sci. Forum, 2010, 644:85-90.[47] Byrne M, Gun'ko Y. Recent advances in research on carbon nanotube-polymer composites [J]. Adv. Mater., 2010, 22(15):1672-1688.[48] Baibarac M, Gmez-Romero P. Nanocomposites based on conducting polymers and carbon nanotubes from fancy materials to functional applications [J]. J. Nanosci. Nanotech., 2006, 6(1):1-14.[49] Hecht D, Hu L, Gruner G. Electronic properties of carbon nanotube/fabric composites [J]. Curr. App. Phys., 2007, 7(1):60-63.[50] Keefer E, Botterman B, Romero M, et al. Carbon nanotube coating improves neuronal recordings [J]. Nat. Nanotech., 2008, 3(7):434-439.[51] Huang X, Qi X, Boey F, et al. Graphene-based composites [J]. Chem. Soc. Rev., 2012, 41(2):666-686.[52] Bonaccorso F, Sun Z, Hasan T, et al. Graphene photonics and optoelectronics [J]. Nat. Photon., 2010, 4(9):611-622.[53] Kuilla T, Bhadra S, Yao D, et al. Recent advances in graphene based polymer composites [J]. Prog. Polym. Sci., 2010, 35(11):1350-1375.[54] Yun D J, Hong K, Kim S, et al. Multiwall carbon nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite films for transistor and inverter devices [J]. ACS App. Mater. Inter., 2011, 3(1):43-439.[55] Razdan S, Patra P, Kar S, et al. Ionically self-assembled polyelectrolyte-based carbon nanotube fibers [J]. Chem. Mater., 2012, 21(14):3062-3071.[56] Chen L, Yuan C, Dou H, et al. Synthesis and electrochemical capacitance of core-shell poly (3,4-ethylenedioxythiophene)/poly (sodium 4-styrenesulfonate)-modified multiwalled carbon nanotube nanocomposites [J]. Electrochim. Acta, 2009, 54(8):2335-2341.[57] Tung T, Kim T, Shim J, et al. Poly(ionic liquid)-stabilized graphene sheets and their hybrid with poly(3,4-ethy-lenedioxythiophene) [J]. Org. Elect., 2011, 12(12):2215-2224.[58] Hong W, Xu Y, Lu G, et al. Transparent graphene/PEDOT-PSS composite films as counter electrodes of dye-sensitized solar cells [J]. Electrochem. Commun., 2008, 10(10):1555-1558.[59] Yin B, Liu Q, Yang L, et al. Buffer layer of PEDOT:PSS/graphene composite for polymer solar cells [J]. J. Nanosci. Nanotech., 2010, 10(3):1934-1938.[60] Chang H, Wang G, Yang A, et al. A transparent, flexible, low-temperature, and solution-processible graphene composite electrode [J]. Adv. Funct. Mater., 2010, 20(17):2893-2902.[61] 景亚霓, 胡文华, 张平, 等. 喷墨印刷沉积的PEDOT/PSS薄膜导电性能 [J]. 液晶与显示, 2010, 25 (5):656-660.