
浏览全部资源
扫码关注微信
中国科学院 上海高等研究院 新型显示技术研究中心, 上海中科联显示技术有限公司, 上海 201203
收稿日期:2012-02-29,
修回日期:2012-04-05,
网络出版日期:2012-06-15,
纸质出版日期:2012-06-15
移动端阅览
于涛, 陈晟, 储培鸣, 郑永亮, 申剑锋. IPS液晶取向膜表面光学各向异性<em>DΔ</em>的研究[J]. 液晶与显示, 2012,(3): 292-296
YU Tao, CHEN Shen, CHU Pei-ming, ZHENG Yong-liang, SHEN Jian-feng. Optic Anisotropy <em>DΔ</em> of Rubbed Polyimide Film for IPS Liquid Crystal Alignment[J]. , 2012,(3): 292-296
于涛, 陈晟, 储培鸣, 郑永亮, 申剑锋. IPS液晶取向膜表面光学各向异性<em>DΔ</em>的研究[J]. 液晶与显示, 2012,(3): 292-296 DOI: 10.3788/YJYXS20122703.0292.
YU Tao, CHEN Shen, CHU Pei-ming, ZHENG Yong-liang, SHEN Jian-feng. Optic Anisotropy <em>DΔ</em> of Rubbed Polyimide Film for IPS Liquid Crystal Alignment[J]. , 2012,(3): 292-296 DOI: 10.3788/YJYXS20122703.0292.
针对共面转换IPS(In-Plane-Switching)液晶显示模式取向膜
利用反射椭偏消光法测量了取向膜表面的光学各向异性
DΔ
值。研究了在不同摩擦条件和亚胺化温度条件下
取向膜表面光学各向异性值
DΔ
值的变化。研究结果表明
随着亚胺化温度升高
DΔ
值呈现下降趋势。在摩擦强度各因子中
压入量和转速对于
DΔ
值影响较大。
DΔ
值可作为一种定量化评价取向膜取向状态的方法
并可作为生产过程中对于液晶稳定性取向的管控方法使用。
The anisotropy
DΔ
of rubbed polyimide film for In-Plane-Switching(IPS) liquid crystal alignment was measured by reflection ellipsometry under the varied conditions of rubbing and imide temperature. It is showed that
DΔ
decreases with increasing imide temperature under the same rubbing condition. The penetration depth and the roll rotation speed play a key role in
DΔ
value. Therefore
DΔ
value not only can be used as a quantitative evaluation method for rubbed film
but as a process control method for stable orientation of liquid crystal.
Oh-e M, Kondo K. Electro-optical characteristics and switching behavior of the in-plane switching mode [J]. Appl.Phys.Lett., 1995,67(26):3895-3897.
Lee S H, Lee S L, Kim H Y. Electro-optic characteristics and switching principle of a nematic liquid crystal cell controlled by fringe-field switching [J]. Appl. Phys. Lett., 1998,73(20):2881-2883.
Gwag J S,Lee Y J,Kim M E,et al. Viewing angle control mode using nematic bistability [J]. Opt.Exp.,2008,16(4):2663-2669.
Lee Y J, Kim Y K.Stabilization of the liquid crystal director in the patterned vertical alignment mode through formation of pretilt angle by reactive mesogen [J]. Appl. Phys. Lett., 2007, 90(26):261910-261912.
Yu T, Peng Z H, Ruan S P. Effect of the fluorinated groups on nematic liquid crystal alignment on monomer crosslinked film [J]. Thin Solid Films., 2004, 466(1-2):326-330.
刘剑, 王明乐, 李园园, 等. 偏振光照对偶氮苯侧链聚硅氧烷膜表面能的提高 [J]. 液晶与显示, 2011,26(5):577-581.
Geary J M, Goodby J W, Kmetz A R, et al. The mechanism of polymer alignment of liquid‐crystal materials [J]. J. Appl. Phys., 1987, 62(10):4100 -4108.
Ishihara S, Wakamoto H,K, Nakazima, et al. The effect of rubbed polymer films on the liquid crystal alignment [J]. Liq. Cryst., 1989, 4(6):669-675.
Sawa K, Sumiyoshi K, Hirai Y, et al. Molecular orientation of polyimide films for liquid crystal alignment studied by infrared dichroism [J]. Jpn. J. Appl. Phys., 1994, 33(11):6273-6276.
Sakamoto S, Arafune R, Ito N, et al. Molecular orientation of rubbed and unrubbed polyimide films determined by polarized infrared absorption [J]. Jpn. J. Appl. Phys., 1994, 33(9B):1323-1326.
Hirosawa I. Relation between molecular orientation and rubbing strength observed by reflection ellipsometry [J]. Jpn. J. Appl. Phys., 1997, 36(8):5192-5196.
Hirosawa I, Sasaki N, Kimura H. Characterization of molecular orientation of rubbed polyimide film by grazing incidence X-ray scattering [J]. Jpn. J. Appl. Phys., 1999, 38(5B): 583-585.
Han K Y, Vetter P, Uchida T. Determination of molecular inclination in rubbed polymer for liquid crystal alignment by measuring retardation [J]. Jpn. J. Appl. Phys., 1993, 32(9A):L1242-L1244.
Hirosawa I. Method of characterizing rubbed polyimide film for liquid crystal display devices using reflection ellipsometry [J]. Jpn. J. Appl. Phys.,1996, 35(11):5873-5875.
T.Uchida. Application and Device Modeling of Liquid Crystal Displays [J]. Mol. Cryst. Liq. Cryst., 1985,123(1):15-55.
0
浏览量
57
下载量
3
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621