
浏览全部资源
扫码关注微信
北京京东方光电科技有限公司 北京,100176
收稿日期:2013-02-21,
修回日期:2013-03-22,
纸质出版日期:2014-02-15
移动端阅览
张家祥, 卢凯, 郭建, 姜晓辉, 崔玉琳, 王亮, 阎长江, 曲连杰, 陈旭, 闵泰烨, 苏顺康. TFT-LCD器件氧化铟锡层无退火工艺研究[J]. 液晶与显示, 2014,29(1): 55-59
ZHANG Jia-xiang, LU Kai, GUO Jian, JIANG Xiao-hui, CUI Yu-lin, WANG Liang, YAN Chang-jiang, QU Lian-jie, CHEN Xu, MIN Tai-ye, SU Shun-kang. Anneal skip of ITO layer in TFT-LCD[J]. , 2014,29(1): 55-59
张家祥, 卢凯, 郭建, 姜晓辉, 崔玉琳, 王亮, 阎长江, 曲连杰, 陈旭, 闵泰烨, 苏顺康. TFT-LCD器件氧化铟锡层无退火工艺研究[J]. 液晶与显示, 2014,29(1): 55-59 DOI:
ZHANG Jia-xiang, LU Kai, GUO Jian, JIANG Xiao-hui, CUI Yu-lin, WANG Liang, YAN Chang-jiang, QU Lian-jie, CHEN Xu, MIN Tai-ye, SU Shun-kang. Anneal skip of ITO layer in TFT-LCD[J]. , 2014,29(1): 55-59 DOI:
对TFT-LCD器件氧化铟锡(ITO)层无退火新工艺进行了深入研究,通过将氧化铟锡相变与聚酰亚胺(PI)膜固化过程同步进行,简化了工艺过程,节约了生产成本。采用无退火工艺氧化铟锡膜层的平均电阻值和膜层透过率与传统高温退火工艺下基本相同,可以实现低的电阻值和高的透过率。无退火工艺下PI膜表面平整均匀,氧化铟锡膜与PI膜界面结合良好,无鼓包、麻点等,也没有反应产物生成;经过TFT特性测试发现,无退火工艺比高温退火工艺条件下,无论暗态还是光照状态,开电流没有明显区别,漏电流可降低44%;通过无退火工艺和传统高温退火工艺制备的液晶显示屏的
V
-
T
特性相同。
This paper makes a deep research on the new technology of anneal skip process for the TFT-LCD device. The anneal skip process can simplify the process and decrease the cost of production by the synchronization of ITO transformation and PI film curing. Using the anneal skip process
the average resistance of ITO layer and the transmittance of the film were the same as that of the traditional high temperature anneal process. A low resistance and a high transmittance could be realized. The surface of PI film was smooth.There was a good interface between the ITO layer and the PI film;no drum kit
pits and reaction products appeared. At dark or photo state
I
on
of TFT using the anneal skip process was the same as that using the high temperature process
but
I
off
had a decrease by 44%. The
V
-
T
characteristic of panel using the anneal skip process and the high temperature anneal process were the same.
王玉如. 液晶显示技术的最新进展[J]. 现代电子技术, 2004, 27(22):85-87. Wang Y R.The latest development of liquid crystal display[J].Modern Electronics Technique, 2004, 27(22):85-87.[2] 孙杨, 张永栋, 朱燕林. 单层ITO多点电容触摸屏的设计[J]. 液晶与显示, 2010, 25(4): 551-553. Sun Y, Zhang Y D, Zhu Y L.Single ITO design in multi touch capacitive panel[J].Chinese Journal of Liquid Crystals and Displays, 2010, 25(4): 551-553.(in Chinese)[3] Gruner G. Carbon nanotube films for transparent and plastic electronics[J].J Mater Chem, 2006, 16: 3533-3539. [4] 李田生, 谢振宇, 张文余, 等. 钝化层沉积工艺对过孔尺寸减小的研究[J]. 液晶与显示, 2012, 27(4):493-498. Li T S, Xie Z Y, Zhang W Y.The study in passivation layer deposition process of hole size reduction[J].Chinese Journal of Liquid Crystals and Displays, 2012, 27(4):493-498.(in Chinese)[5] 宴峰, 张自立. 高分辨率LCD控制板的设计与实现[J]. 计算机与数字工程, 2002, 4(30):24-28. Yan F, Zhang Z L.Design and implementation of a high resolution LCD control board[J]. Computer and Digital Engineering, 2002, 4(30):24-28.(in Chinese)[6] 刘翔, 薛建设, 周伟峰, 等. 改善沉积氮化硅薄膜对FFS-TFT透明电极ITO影响的研究[J]. 真空科学与技术学报, 2012, 32(1):36-38. Liu X, Xue J S, Zhou W F. Study on the effect of improving the deposition of silicon nitride films on ITO[J].Vacuum Science and Technology, 2012, 32(1):36-38.(in Chinese)[7] Lewis B G, Paine D C.Applications and processing of transparent conducting oxides[J].Mrs Bull, 2000, 25:22-27.[8] Wu Z C, Chen Z H, Logan J M. Transparent, conductive carbon nanotube films[J].Science, 2004, 305:1273-1276.[9] Leterrier Y, Medico L, Manson J. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays[J].Thin Solid Films, 2004, 460: 156-166.[10] 王文文, 王峥, 郝维昌. 离子注入对ITO薄膜电学特性的影响[J]. 液晶与显示, 2009, 24(2):187-192. Wang W W, Wang Z, Hao W C. Effect of ion implantation on the electrical properties of ITO film[J].Chinese Journal of Liquid Crystals and Displays, 2009, 24(2):187-192.(in Chinese)
0
浏览量
109
下载量
4
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621