Lei MAO, Zheng-yuan ZHANG, Rong-hua FAN, et al. Research and improvement of black screen light leakage in narrow-length automotive display[J]. Chinese journal of liquid crystals and displays, 2019, 34(10): 982-991.
DOI:
Lei MAO, Zheng-yuan ZHANG, Rong-hua FAN, et al. Research and improvement of black screen light leakage in narrow-length automotive display[J]. Chinese journal of liquid crystals and displays, 2019, 34(10): 982-991. DOI: 10.3788/YJYXS20193410.0982.
Research and improvement of black screen light leakage in narrow-length automotive display
黑画面的漏光是高级超维场开关显示模式(Advanced-Super Dimensional Switching,ADS)TFT-LCD中常见的一种不良,当液晶面板有形变或应力作用即容易发生漏光不良,窄长型ADS车载产品更容易受力形变。本文探讨漏光发生的机理并进行改善。研究发现,面板由于形变,内应力,液晶偏转发生异常,最终导致黑画面的漏光。本文以312.4 mm(12.3 in)寸窄长型车载ADS产品为例,首先对平坦度进行分析:从面板平坦度、背光源平坦度、背光源口子胶位置等方面分析。再从应力着手:从模组将集成电路压接在玻璃基板上的工艺(Chip on Glass,COG)、面板和背光源的组装精度进行漏光实验。实验结果表明,在面板平坦度提升、背光源平坦度管控、背光源口子胶设计为半口子胶并由长边固定变更为短边固定,COG绑定温度和压力进行实验设计、组装精度提升等方面改善后,黑画面漏光可从15%降低至0.1%以内。
Abstract
Black light leakage is a common in advanced-super dimensional switching(ADS) mode TFT-LCD product. It is easy to cause light leakage when the panel has deformation or internal stress
especially for narrow-length products. This article discussed the reason of light leakage and improve it. It is found that the panel deformation
internal stress
and liquid crystal deflection are abnormal
which can lead to light leakage. For example
this paper discusses 312.4 mm(12.3 in) ADS automotive product. At first
for flatness:we analyzed the panel flatness
backlight flatness and the location of backlight tape. Second
for internal stress:we analyzed COG (Chip on Glass) technology
assembly accuracy of panel and backlight. Light leakage experiments show that improvement of panel flatness
backlight flatness and assembly accuracy can reduce the level of leakage. Other factors
such as cutting the length of backlight tape and changing its position from long side to short side
controlling COG bonding temperature and pressure with DOE(Design of Experiment) are also effective. All the above measures
light leakage can be reduced from 15% to less than 0.1%.
LIAO Y P, SONG Y Z, SHAO X B, et al . Thin Film Transistor Liquid Crystal Display [M]. Beijing: Publishing House of Electronics Industry, 2016: 155-176. (in Chinese)
JIAN S M, XIE Y, XIA G F, et al . Analysis and improvement of TFT-LCD edge light-leaking mechanism[J] . Chinese Journal of Liquid Crystals and Displays , 2017, 32(6): 455-460. (in Chinese)
HU W, MU H Y, TAN B Q, et al . Measurement of surface stress of chemically strengthened glass by scattered light photoelasticity[J]. Glass & Enamel , 2017, 45(5): 29-33. (in Chinese)
WANG Z M, FU S M, YAO W G, et al . Experimental study on photo elastic properties of plexiglass[J]. Journal of Materials Engineering , 1983(1): 19-21. (in Chinese)
LIAO H B, WANG T, HE C J, et al . The measurement and application of the birefringence effect in liquid crystal cell[J]. College Physics , 2016, 35(8): 44-47. (in Chinese)
LI X H, BAO J P, XU B, et al . Improvement research of TFT-LCD module black uniformity[J]. Chinese Journal of Liquid Crystals and Displays , 2018, 33(4): 271-276. (in Chinese)
WANG Y C, ZHANG Z D, ZHOU X. Study of light leakage induced by the elastic anisotropy of the nematic liquid crystal[J]. Chinese Journal of Liquid Crystals and Displays , 2015, 30(6): 949-959. (in Chinese)
YIN G, LI C L, LU J G. Improvement of COG Mura in IPS mode liquid crystal display device[J]. Industrial Design , 2016(3): 173, 179. (in Chinese)
车树勤.扇形弧长与面积公式之应应用[J].中学课程辅导:高考版, 2011(11):33.
CHE S Q. Thin film transistor liquid crystal display display principle and design[J]. Publishing House of Electronics Industry, 2011(11): 33. (in Chinese)
ZHAO G L, HUANG Y X. Design and application of vehicle backlight automatic film assembly machine[J]. Technological Development of Enterprise , 2017, 36(12): 34-36. (in Chinese)