Yan-bing WU, Xin-guo LI, You-mei DONG, et al. Relationship between parallax barrier opening ratio and auto-stereoscopic display crosstalk[J]. Chinese journal of liquid crystals and displays, 2019, 34(5): 472-476.
DOI:
Yan-bing WU, Xin-guo LI, You-mei DONG, et al. Relationship between parallax barrier opening ratio and auto-stereoscopic display crosstalk[J]. Chinese journal of liquid crystals and displays, 2019, 34(5): 472-476. DOI: 10.3788/YJYXS20193405.0472.
Relationship between parallax barrier opening ratio and auto-stereoscopic display crosstalk
The relationship between parallax barrier opening ratio and auto-stereoscopic crosstalk was researched. Firstly
the fixed barriers with different aperture opening ratios were used to make 3D display and the rules were verified:the bigger the aperture opening ratio is
the bigger the 3D crosstalk will be (2%~4% increase of opening ratio can lead to 0.2%~2% increase of 3D crosstalk). However
the difference between 2D panels was not small and the manufacture of 3D panels might induce some offset
so the active barriers were used to verify the rule again. With a TN cell working as a parallax barrier
by modifying the operation voltage
the transmittance was changed
but other factors kept the same. For a 2view 3D display
when the operation voltage of parallax barrier increased from 4 V to 15 V
its 3D crosstalk decreased by 1.6% gradually. The results of this experiments lead to the rule:the bigger the aperture opening ratio is
China Optoelectronics Industry Association LCD Branch. Chinese Flat Display Yearbook [M]. Beijing:Publishing House of Electronics Industry, 2013:178-183. (in Chinese)
王琼华.3D显示技术与器件[M].北京:科学出版社, 2011.
WANGQ H. 3D Display Technology and Device [M]. Beijing:Science Press, 2011. (in Chinese)
XIE Y T, SU X H, ZHENG J W, et al . Key properties of autostereoscopic display[J]. Chinese Journal of Liquid Crystals and Displays , 2015, 30(5):888-893. (in Chinese)
Ministry of Industry and Information Technology of the People's Republic of China. SJ/T 11646-2016 Method of measurement of the image quality of autostereoscopic 3DTV[S]. Beijing: China Electronics Standardization Institute, 2016. (in Chinese)
IEC. IEC 62629-22-13D display devices - part 22-1: measuring methods for autostereoscopic displays - optical[S]. Geneva: IEC, 2016.
马哲朋.立体显示器串扰特性研究[D].杭州: 浙江大学, 2015.
MA Z P. Research on crosstalk in stereoscopic displays[D]. Hangzhou: Zhejiang University, 2015. (in Chinese)
KE Z R, YAO J M, GUO T L, et al . Optimum parameter design of naked-eye stereoscopic display based on parallax barrier[J]. Video Engineering , 2014, 38(3):76-78, 101. (in Chinese)
WANG A H, LI X F, JI X M.A method to reduce the crosstalk in autostereoscopic displays based on slanted parallax barrier or lenticular lens[J]. Journal of Henan Normal University ( Natural Science Edition ), 2014, 42(5):56-59. (in Chinese)
Effect of sub-pixel arrangement direction on crosstalk of small interval LED naked eye 3D display system
Effect of the vertical/slanted staggered barrier on autostereoscopic displays
Modeling and crosstalk calculation methods of spatial viewing zones for the autostereoscopic display device based on parallax barrier or lenticular lens
Optical Properties of Parallax Barrier and It's Influence on View Zone
Principle of Moriě Fringe in Autostereoscopic Display Based on Parallax Barrier and Lenticular Lens
Related Author
Wei DANG
Wen-hua LI
Ru DENG
Yu CHEN
Yan ZHAO
Xiang-yao ZENG
Jian-min YAO
Yun YE
Related Institution
College of Physical Science and Technology, Hebei University
School of Information Engineering, Baoding College
National & Local United Engineering Laboratory of Flat Panel Display Technology, School of Physics and Information Engineering, Fuzhou University
National Engineering Laboratory for Special Display