Athermalization design of airborne mirror-lens optical system

Jin-feng LIAO; Ya-lin DING; Yuan YAO

doi:10.3788/YJYXS20193401.0039

您当前的位置：

首页 >

文章列表页 >

Athermalization design of airborne mirror-lens optical system

Materials and Devices | 更新时间：2020-07-05

- Athermalization design of airborne mirror-lens optical system
- Chinese Journal of Liquid Crystals and Displays Vol. 34, Issue 1, Pages: 39-46(2019)
- 作者机构：
  
  1.中国科学院长春光学精密机械与物理研究所航空光学成像与测量重点实验室, 吉林长春 130033
  2.中国科学院大学, 北京 100049
- 作者简介：
- 基金信息：
- DOI：10.3788/YJYXS20193401.0039
  CLC： TH74
- Received：20 August 2018，
  
  Accepted：12 November 2018，
  
  Published：25 January 2019
- 稿件说明：
移动端阅览
Jin-feng LIAO, Ya-lin DING, Yuan YAO. Athermalization design of airborne mirror-lens optical system[J]. Chinese journal of liquid crystals and displays, 2019, 34(1): 39-46.
DOI：

Jin-feng LIAO, Ya-lin DING, Yuan YAO. Athermalization design of airborne mirror-lens optical system[J]. Chinese journal of liquid crystals and displays, 2019, 34(1): 39-46. DOI： 10.3788/YJYXS20193401.0039.

摘要

为了消除在实际飞行过程中温度变化对机载折反式光学系统成像质量的影响，对该系统的光学元件、机械结构等部分进行热分析，实现机载折反式光学系统的无热化设计。首先，根据透镜的光焦度公式推导透镜的光焦度温度函数，列出透镜组的消热差方程。接着，在考虑支撑结构的影响时引入轴向放大率，以此表现折反式系统部分元件间隔变化对系统焦距影响大的特点。最后，结合前两者确定完整的消热差方程来指导无热化设计。仿真结果表明，工作在486~656 nm波段，焦距为1 850 mm的机载折反式可见光光学系统在0~40℃之间成像良好，调制传递函数下降不到0.1。

Abstract

In order to eliminate the influence of temperature change on the imaging quality of the airborne mirror-lens optical system during the actual flight

thermal analysis of the optical components and mechanical structures of the system was carried out to realize the athermal design of the airborne mirror-lens optical system. First

the power temperature function of the lens was derived from the power formula of the lens

and the athermal equation of the lens group was listed. Then

the axial magnification was introduced when considering the influence of the support structure

so as to show that the variation of the component spacing of the mirror-lens system had a great influence on the focal length of the system. Finally

the complete athermal equation was determined in conjunction with the former two to guide the athermal design. The simulation results show that the airborne mirror-lens visible optics system with a focal length of 1 850 mm works well in the 486~656 nm band between 0~40℃

and the modulation transfer function decreases by less than 0.1.

关键词

Keywords

references

沈宏海, 王国华, 丁金伟, 等.主动补偿无热化技术在机载红外光学系统中的应用[J].光学精密工程, 2010, 18(3):593-601.

SHEN H H, WANG G H, DING J W, et al. Application of active-athermal compensation to airborne IR optical systems[J]. Optics and Precision Engineering , 2010, 18(3):593-601. (in Chinese)

卢意红, 邓强.红外光学系统无热化设计研究[J].红外, 2012, 33(5):32-35.

LU Y H, DENG Q. Study of design of athermalizing infrared optical system[J]. Infrared, 2012, 33(5):32-35.(in Chinese)

孙金霞, 刘建卓, 孙强, 等.折/衍混合消热差共形光学系统的设计[J].光学精密工程, 2010, 18(4):792-797.

SUN J X, LIU J Z, SUN Q, et al. Athermal design for hybrid refractive/diffractive conformal optical system[J]. Optics and Precision Engineering, 2010, 18(4):792-797. (in Chinese)

王学新, 焦明印.红外光学系统无热化设计方法的研究[J].应用光学, 2009, 30(1):129-133.

WANG X X, JIAO M Y. Athermalization design for infrared optical systems[J]. Journal of Applied Optics , 2009, 30(1):129-133. (in Chinese)

YASUHISA T, TAJIME T. Expansion of anathermal chart into a multilens system with thick lenses spaced apart[J]. Opt. Eng. , 1996, 35(10):3001-3006.

BEHRMANN G P, BOWEN J. Influence of temperature on diffractive lens performance[J]. Appl Opt., 1993, 32(14):2483-2489.

钱义先, 贾远林, 梁伟, 等.航空CCD相机可见光光学系统消热差设计[J].光子学报, 2009, 38(9):2279-2282.

QIAN Y X, JIA Y L, LIANG W, et al . Athermal design for visible optical system on aerial CCD camera[J]. Acta Photonica Sinica, 2009, 38(9):2279-2282. (in Chinese)

申碧云, 高明.红外光学系统被动式无热化设计方法[J].电光与控制, 2012, 19(6):70-73, 78.

SHEN B Y, GAO M. Passive optical athermalization design for infrared optical system[J]. Electronics Optics & Control, 2012, 19(6):70-73, 78. (in Chinese)

张卓, 蔡猛.双波段红外光学系统无热化设计[J].电光与控制, 2015, 22(5):63-67.

ZHANG Z, CAI M.Athermalization design of dual-wavelength infrared optical system[J]. Electronics Optics & Control, 2015, 22(5):63-67. (in Chinese)

孙宏宇.紧凑型折/衍混合中波红外无热化成像光学系统[J].光电技术应用, 2016, 31(3):20-24.

SUN H Y. Compact Refractive and Diffractive Hybrid MWIRAthermalizing Optical Imaging System[J]. Electro-optic Technology Application, 2016, 31(3):20-24. (in Chinese)

石顺祥, 王学思, 刘劲松.物理光学与应用光学[M].2版.西安:西安电子科技大学出版社, 2008.

SHI S X, WANG X E, LIU J S. Physical Optics and Applied Optics [M]. 2nd ed.Xi'an:Xidian University Press, 2008. (in Chinese)

王学新, 焦明印.光学被动式和机电式组合消热差方法的研究[J].应用光学, 2010, 31(3):354-359.

WANG X X, JIAO M Y. Combination of optical passive and mechanical-electrical athermalisation[J]. Journal of Applied Optics, 2010, 31(3):354-359(in Chinese).

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China 130033 Postal code：130033
Tel：0431-86176059 Email：yjxs@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰