Qiao YAN, Xin GONG, Zi-xue LIU, et al. Characteristies of optical adhesives in touch panel[J]. Chinese journal of liquid crystals and displays, 2017, 32(4): 275-280.
DOI:
Qiao YAN, Xin GONG, Zi-xue LIU, et al. Characteristies of optical adhesives in touch panel[J]. Chinese journal of liquid crystals and displays, 2017, 32(4): 275-280. DOI: 10.3788/YJYXS20173204.0275.
Characteristies of optical adhesives in touch panel
Aiming at the problem of display Mura in touch LCDs
we put forward the method that different LCDs choose different optical adhesives or different bonding procedures. First of all
we put forward an equivalent simplification of the structure for the LCDs
the structure consists of up polarizer
CF substrate
liquid crystal equivalent layer
TFT substrate and down polarizer. and 2 LCDs are tested for mechanical characteristic parameters. Then
the simulation model is established according to the actual size. Furthermore
the simulation analysis based on the parameters of optical adhesive is performed. Results show that it is better to apply different optical adhesives with different thermodynamic parameters for individual LCDs. The simulation concludes that the optical adhesive with the elastic modulus under 1.65×10
8
Pa and the linear expansion coefficient under 1.2×10
-3
m/℃ is suitable for LCD 1. The optical adhesive with the elastic modulus under 1.65×10
7
Pa and the linear expansion coefficient under 1.2×10
-3
m/℃ is suitable for LCD 2. Such method to choose suitable optical adhesives for LCDs is feasible and provides a valuable reference for the improvement in actual production.
关键词
Keywords
references
张逸. 液晶屏LOCA全贴合工艺及改善[D]. 兰州: 苏州大学, 2013.
ZHANG Y. LCD LOCA full lamination process and improvement[D]. Soochow:Soochow University, 2013. (in Chinese)
DUAN Q P, LIU Y L, ZHAO N H. Studying of capacitive touch screen devices in the dispensing and laminating[J]. Equipment for Electronic Products Manufacturing , 2014(5):19-23. (in Chinese)
SUN H B, DUAN Q P, ZHAO N H. Analysis of the touch panel market trends from the full-fit technology development[J]. Equipment for Electronic Products Manufacturing , 2013(6):45-49. (in Chinese)
刘瑞.触摸屏技术及其性能分析[J].装备制造技术, 2010(3):69-70, 76.
LIU R. Touch-screen technology and it's performance analysis[J]. Equipment Manufacturing Technology, 2010(3):69-70, 76. (in Chinese)
单海云. 手机屏幕的全贴合技术工艺改善[D]. 苏州: 苏州大学, 2015.
SHAN H Y.Full lamination process of the mobile phone screen and improvement[D]. Soochow:Soochow University, 2015. (in Chinese)
LI C. The preparation and properties of one liquid optically clear adhesive for capacitive touch panels[D]. Guangzhou:South China University of Technology, 2014. (in Chinese)
马群刚.TFT-LCD原理与设计[M].北京:电子工业出版社, 2011.
MA Q G. TFT-LCD Principle and Design [M]. Beijing:Publishing House of Electronics Industry, 2011. (in Chinese)
田民波, 叶峰.TFT液晶显示原理与技术[M].北京:科学出版社, 2010.
TIAN M B, YE F. Principle and Technology of TFT Liquid Crystal Display [M]. Beijing:Science Press, 2010. (in Chinese)
高鸿锦, 董友梅.液晶与平板显示技术[M].北京:北京邮电大学出版社, 2007.
GAO H J, DONG Y M. Study the Key Technology of APS Star Sensor [M]. Beijing:Beijing University of Posts and Telecommunication Press, 2007. (in Chinese)
ZHOU H, MA Q, YIN D G, et al. Thermal analysis of large scale LED back light unit[J]. Chinese Journal of Liquid Crystals and Displays , 2011, 26(2):320-323. (in Chinese)