Ultra-thin design of direct-lit backlight unit

LI De-jun; LIU Gang; LV Guo-qiang; FANG Xu-dong; FENG Qi-bin

doi:10.3788/YJYXS20142906.1101

您当前的位置：

首页 >

文章列表页 >

Ultra-thin design of direct-lit backlight unit

Table of contents | 更新时间：2020-08-12

- Ultra-thin design of direct-lit backlight unit
- Chinese Journal of Liquid Crystals and Displays Vol. 29, Issue 6, Pages: 1101-1105(2014)
- 作者机构：
  
  1. 合肥京东方显示光源有限公司,安徽合肥,230012
  2. 合肥工业大学仪器科学与光电工程, 安徽合肥 230009
  3. 特种显示技术教育部重点实验室特种显示技术国家工程实验室现代显示技术省部共建国家重点实验室,安徽合肥,230009
- 作者简介：
- 基金信息：
- DOI：10.3788/YJYXS20142906.1101
  CLC： TN27
- Received：20 June 2014，
  
  Revised：21 July 2014，
  
  Published Online：30 July 2014，
  
  Published：05 December 2014
- 稿件说明：
移动端阅览
李德君, 刘刚, 吕国强, 方旭东, 冯奇斌. 直下式LED背光模组的超薄设计[J]. 液晶与显示, 2014,29(6): 1101-1105

LI De-jun, LIU Gang, LV Guo-qiang, FANG Xu-dong, FENG Qi-bin. Ultra-thin design of direct-lit backlight unit[J]. , 2014,29(6): 1101-1105
李德君, 刘刚, 吕国强, 方旭东, 冯奇斌. 直下式LED背光模组的超薄设计[J]. 液晶与显示, 2014,29(6): 1101-1105 DOI： 10.3788/YJYXS20142906.1101.

LI De-jun, LIU Gang, LV Guo-qiang, FANG Xu-dong, FENG Qi-bin. Ultra-thin design of direct-lit backlight unit[J]. , 2014,29(6): 1101-1105 DOI： 10.3788/YJYXS20142906.1101.

摘要

为减少混光距离进而获得超薄直下式LED背光模组，提出一种具有逆棱微结构的扩散板。对这种逆棱微结构进行了光学理论分析，证明了该结构在降低混光距离方面具有可行性。对逆棱微结构扩散板的光学效果进行了实验验证，并用于81.3 cm（32 in）LED背光模组。实验结果表明：该结构扩散板可有效增大灯影光圈，相对无结构扩散板，光圈直径增大约10%；在达到相同混光效果时，具有该结构扩散板的混光高度降低；采用该逆棱微结构的扩散板的背光模组混光高度由13 mm降低至11.8 mm。采用具有逆棱微结构的扩散板有助于实现LED背光模组的超薄设计。

Abstract

In order to reduce optical distance(OD) and realize ultra-thin design of direct-lit LED backlight module

this paper proposes a kind of diffuser plate with prism-based micro-structure on the bottom. The optical theoretical analysis is first performed on the prism-based micro-structure

which proves to be feasible to reduce the OD. The prism-based micro-structure is then practically tested and utilized in 81.3 cm(32 in) LED backlight. Experimental results show that the diffuser plate with prism micro-structure has effect on increasing the diameter of LED shadow by about 10% and reducing OD. The OD of the prototype with 32 in LED BLU is reduced from 13 mm to 11.8 mm.Such diffuser plate with prism-based micro-structure can help to realize the ultra-thin design.

关键词

Keywords

references

Zukauskas A, Shur M, Gaska R.Introduction to Solid-State Lighting[M].New York:Wiley,2002.[2] Bergh A A, Dean P J. Light-emitting diodes[J].Proceedings of the IEEE,1972, 60(2): 156-223.[3] Engelsen D,童林夙. 背光源的发展趋势[J]. 光电子技术, 2006, 26(2):74-80. Engelsen D, Tong L S. Trends of backlights[J].Journal of Opto-Electronic Technology,2006, 26(2):74-80.(in Chinese)[4] Wu S T. Next generation LCD technology[J].Journal of Information Display,2010, 26(1):3.[5] 王文根, 李瑛, 王秀如, 等. 大尺寸TFT-LCD的LED背光技术[J]. 现代显示, 2006(8): 59-63. Wang W G, Li Y, Wang X R. Technologies of LED backlight for large-size-TFT-LCD[J].Advanced Display,2006(8): 59-63.(in Chinese)[6] 肖箫. 用于LCD的LED背光源配光设计[D].广东:华南理工大学, 2012. Xiao X.Distribution design of LED backlight for LCD[D]. Guangdong: South China University of Technology, 2012.(in Chinese)[7] 庄四祥, 钱可元, 李旭亮, 等. 白光 LED 对直下式 TV 背光色域的影响[J]. 液晶与显示, 2011, 26(4): 474-479. Zhuang S X, Qian K Y, Li X L, et al.Effect of white LEDs on Gamut of TV with direct illumination-type LED backlight[J].Chinese Journal of Liquid Crystals and Displays,2011, 26(4): 474-479.(in Chinese)[8] 冯奇斌,何会杰,张伟伟,等. 用于侧出式发光二极管背光的全局动态调光算法[J]. 光学精密工程, 2012, 20(7): 1455-1462. Feng Q B, He H J, Zhang W W,et al.Global dimming algorithm for side-lit LED backlights[J].Optics and Precision Engineering,2012, 20(7): 1455-1462.(in Chinese)[9] 范曼宁, 张国义, 郝茂盛, 等. 一种高亮度直下式背光液晶模组设计[J]. 光电子技术, 2012, 31(3): 162-165. Fan M N, Zhang G Y, Hao M S, et al.A high light direct-type backlight design for LCD module[J].Optoelectronics Technology,2012, 31(3): 162-165.(in Chinese)[10] 陶梅. LED光源透镜相关专利简介[J]. 中国照明电器, 2012(5):32-33. Tao M.Brief Introduction of the Patents about LED Lens[J].China Light & Lighting,2012(5):32-33.(in Chinese)[11] 郝剑, 刘华, 孙强, 等. LED自由曲面准直透镜的优化设计方法[J]. 激光与光电子学进展, 2014(3):175-180. Hao J, Liu H, Sun Q, et al.Optimization of freeform surface lens for collimating illumination of LED[J].Laser & Optoelectronics Progress,2014(3):175-180.(in Chinese)[12] 薛涛, 苏成悦, 张康, 等. 基于扩展光源的LED小角度自由曲面透镜设计[J]. 光学技术, 2014(1):45-49. Xue T, Su C Y, Zhang K, et al.Design for LED free surface lens with small angle based on extended source[J].Optical Technique,2014(1):45-49.(in Chinese)[13] 董丽, 刘华, 王尧, 等. 紧凑型 LED 配光设计中光源模型可靠性研究[J]. 光子学报, 2014, 43(2):02220031-02220035. Dong L, Liu H, Wang Y, et al.Reliability of light source modeling for distribution design on compact LED[J].Acta Photonica Sinica,2014, 43(2): 02220031-02220035.(in Chinese)[14] 杜乃锋. 面向大功率LED光源三维光学设计方法的研究[D]. 广东:华南理工大学, 2012. Du N F.Study on three-dimensional optical design methods based om High-power LED source[D]. Guangdong: South China University of Technology, 2012.(in Chinese)[15] 李澄, 李农. 一种用于均匀照明的LED透镜设计方法[J]. 照明工程学报, 2010(3):46-49. Li C, Li N.A LED lens design method for uniform illumination[J].China Illuminating Engineering Journal,2010(3):46-49.(in Chinese)[16] 王晓伟. 挤出滚压法制备聚合物微结构成型技术的开发与研究[D]. 北京:北京化工大学, 2011. Wang X W.Development and research on polymer microstructures fabrication technology by extrusion roller embossing process[D]. Beijing: Beijing University of Chemical Technology, 2011.(in Chinese)

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China 130033 Postal code：130033
Tel：0431-86176059 Email：yjxs@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰