Mechanical properties analysis of 3 D printed specimens with different orientations based on DIC

Bin ZHANG; Yi-chen ZHONG; Fan-xiu CHEN; Xin-ya GAO; Xiao WANG; Zhao-jun ZHANG; Wei-na ZHAO; Xiao-bin ZHOU

doi:10.37188/CJLCD.2020-0331

您当前的位置：

首页 >

文章列表页 >

Mechanical properties analysis of 3 D printed specimens with different orientations based on DIC

Device Physics and Device Preparation | 更新时间：2021-04-28

- Mechanical properties analysis of 3 D printed specimens with different orientations based on DIC
- Chinese Journal of Liquid Crystals and Displays Vol. 36, Issue 5, Pages: 673-679(2021)
- 作者机构：
  
  1.青岛理工大学理学院, 山东青岛 266520
  2.青岛博瑞科三维制造有限公司, 山东青岛 266000
- 作者简介：
- 基金信息：
  
  National Natural Science Foundation of China(12072170);National Natural Science Foundation of China(11472145)
- DOI：10.37188/CJLCD.2020-0331
  CLC： O438.1
- Received：03 December 2020，
  
  Revised：25 December 2020，
  
  Published：2021-05
- 稿件说明：
移动端阅览
Bin ZHANG, Yi-chen ZHONG, Fan-xiu CHEN, et al. Mechanical properties analysis of 3 D printed specimens with different orientations based on DIC[J]. Chinese journal of liquid crystals and displays, 2021, 36(5): 673-679.
DOI：

Bin ZHANG, Yi-chen ZHONG, Fan-xiu CHEN, et al. Mechanical properties analysis of 3 D printed specimens with different orientations based on DIC[J]. Chinese journal of liquid crystals and displays, 2021, 36(5): 673-679. DOI： 10.37188/CJLCD.2020-0331.

摘要

不同的构建取向对熔融沉积成型的标准试样的力学性能有着显著影响。本文采用聚乳酸线材，使用熔融沉积式3D打印方法制备站立式、侧立式、平躺式3种不同方向打印成型的试样，采用数字图像相关方法实时分析并记录试样拉伸与弯曲变形过程。使用该测量系统能够有效获取试样的真实变形与应变，结合试验机数据给出更为精确的应力-应变曲线，通过对应变云图中线状区域的观察能够准确地预测断裂发生的时间与位置，比较不同构建取向成型的工艺对打印制品的力学性能的影响。试验结果表明：站立式打印的试件在拉伸试验和3点弯曲试验中没有明显颈缩现象，其变形、伸长率以及强度也是最低的，呈现出脆性材料所具有的特性。侧立式具有很好的抗拉性能，其颈缩现象出现后发生很小的变形就会断裂，所能承受的力呈现直线下降的趋势，直至断裂。平躺式的强度相近于侧立式，其发生颈缩现象直至断裂变形量相对侧立式要大，且应力随着变形的增大表现出较为平缓减小的特征，强度、延展性等呈现出最佳的机械性能。

Abstract

Different construction orientations have a significant influence on the mechanical properties of the standard samples of fused deposition modeling (FDM). In this paper

polylactic acid (PLA) wire rod was used to prepare three kinds of printing samples in three different directions: standing

side standing and lying down

The digital image correlation (DIC) method was used to analyze and record the tensile and bending deformation process of the sample in real time. The real deformation and strain of the sample can be obtained effectively by using the measurement system

and the more accurate stress-strain curve can be obtained combined with the test machine data. Through the observation of the linear region in strain nephogram

it can accurately predict the time and location of fracture

and compare the mechanical properties of different oriented forming processes on printed products performance impact. The test results show that there is no obvious necking phenomenon in the tensile test and three-point bending test

and its deformation

elongation and strength are also the lowest

showing the characteristics of brittle materials. The lateral vertical has good tensile properties. After the necking phenomenon occurs

it will fracture after a small deformation

and the force that it can bear presents a linear downward trend until it breaks. The strength of the lying down type are similar to those of the side standing type

and the necking phenomenon occurs until the fracture deformation is larger than that of the side standing type

and the stress decreases gently with the increase of deformation

showing the best mechanical properties in strength and ductility.

关键词

Keywords

references

卢秉恒 , 李涤尘 . 增材制造(3D打印)技术发展 . 机械制造与自动化 , 2013 . 42 ( 4 ): 1 - 4 . DOI: 10.3969/j.issn.1671-5276.2013.04.001 http://doi.org/10.3969/j.issn.1671-5276.2013.04.001 .

B H LU , D C LI . Development of the additive manufacturing (3D printing) technology . Machine Building & Automation , 2013 . 42 ( 4 ): 1 - 4 . DOI: 10.3969/j.issn.1671-5276.2013.04.001 http://doi.org/10.3969/j.issn.1671-5276.2013.04.001 .

张学军 , 唐思熠 , 肇恒跃 , 等 . 3D打印技术研究现状和关键技术 . 材料工程 , 2016 . 44 ( 2 ): 122 - 128 . https://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201602020.htm https://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201602020.htm .

X J ZHANG , S Y TANG , H Y ZHAO , 等 . Research status and key technologies of 3D printing . Journal of Materials engineering , 2016 . 44 ( 2 ): 122 - 128 . https://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201602020.htm https://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201602020.htm .

范兆乾 . 聚乳酸(PLA)合成与改性的研究进展 . 河南化工 , 2011 . 28 ( 15 ): 21 - 24 . DOI: 10.3969/j.issn.1003-3467.2011.15.021 http://doi.org/10.3969/j.issn.1003-3467.2011.15.021 .

Z Q FAN . Research progress of synthesis and modification of polylactic acid (PLA) . Henan Chemical Industry , 2011 . 28 ( 15 ): 21 - 24 . DOI: 10.3969/j.issn.1003-3467.2011.15.021 http://doi.org/10.3969/j.issn.1003-3467.2011.15.021 .

迟百宏 , 解利杨 , 高晓东 , 等 . FDM工艺中构建取向对塑料制品力学性能的影响 . 塑料 , 2015 . 44 ( 4 ): 40 - 42 . https://www.cnki.com.cn/Article/CJFDTOTAL-SULA201504010.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SULA201504010.htm .

B H CHI , L Y XIE , X D GAO , 等 . Effects of build orientation in FDM technology on mechanical properties of plastic products . Plastics , 2015 . 44 ( 4 ): 40 - 42 . https://www.cnki.com.cn/Article/CJFDTOTAL-SULA201504010.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SULA201504010.htm .

于国庆 , 毕超 . 3D打印参数对聚乳酸试样拉伸性能的影响 . 中国塑料 , 2017 . 31 ( 11 ): 125 - 129 . https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201711036.htm https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201711036.htm .

G Q YU , C BI . Effects of 3D printing parameters on tensile performance of PLA printed specimens . China Plastics , 2017 . 31 ( 11 ): 125 - 129 . https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201711036.htm https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201711036.htm .

刘亚 , 何冰 , 陈鹏飞 , 等 . FDM快速成型工艺对成型件力学性能的影响 . 中国塑料 , 2017 . 31 ( 4 ): 75 - 80 . https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201704023.htm https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201704023.htm .

Y LIU , B HE , P F CHEN , 等 . Effect of rapid prototyping technique on mechanical properties of plastic parts through FDM process . China plastics , 2017 . 31 ( 4 ): 75 - 80 . https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201704023.htm https://www.cnki.com.cn/Article/CJFDTOTAL-ZGSU201704023.htm .

金泽枫 , 金杨福 , 周密 , 等 . 基于FDM聚乳酸3D打印材料的工艺性能研究 . 塑料工业 , 2016 . 44 ( 2 ): 67 - 70 . DOI: 10.3969/j.issn.1005-5770.2016.02.017 http://doi.org/10.3969/j.issn.1005-5770.2016.02.017 .

Z F JIN , Y F JIN , M ZHOU , 等 . Research of processing property of PLA materials for 3D printing based on FDM . China Plastics Industry , 2016 . 44 ( 2 ): 67 - 70 . DOI: 10.3969/j.issn.1005-5770.2016.02.017 http://doi.org/10.3969/j.issn.1005-5770.2016.02.017 .

I DURGUN , R ERTAN . Experimental investigation of FDM process for improvement of mechanical properties and production cost . Rapid Prototyping Journal , 2014 . 20 ( 3 ): 228 - 235 . DOI: 10.1108/RPJ-10-2012-0091 http://doi.org/10.1108/RPJ-10-2012-0091 .

高士友 , 黎宇航 , 周野飞 , 等 . 熔融沉积(FDM)3D打印成形件的力学性能实验研究 . 塑性工程学报 , 2017 . 24 ( 1 ): 200 - 206 . https://www.cnki.com.cn/Article/CJFDTOTAL-SXGC201701032.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SXGC201701032.htm .

S Y GAO , Y H LI , Y F ZHOU , 等 . Mechanical properties experiment of 3D printing forming specimens with fused deposition modeling (FDM) . Journal of Plasticity Engineering , 2017 . 24 ( 1 ): 200 - 206 . https://www.cnki.com.cn/Article/CJFDTOTAL-SXGC201701032.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SXGC201701032.htm .

毕永豹 , 杨兆哲 , 许民 . 打印方式对熔融沉积成型制品性能的影响 . 塑料科技 , 2017 . 45 ( 4 ): 59 - 64 . https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201704018.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201704018.htm .

Y B BI , Z Z YANG , M XU . Influence of printing conditions on properties of FDM products . Plastics Science and Technology , 2017 . 45 ( 4 ): 59 - 64 . https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201704018.htm https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201704018.htm .

C CASAVOLA , A CAZZATO , V MORAMARCO , 等 . Residual stress measurement in fused deposition modelling parts . Polymer Testing , 2017 . 58 249 - 255 . DOI: 10.1016/j.polymertesting.2017.01.003 http://doi.org/10.1016/j.polymertesting.2017.01.003 .

B RANKOUHI , S JAVADPOUR , F DELFANIAN , 等 . Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation . Journal of Failure Analysis and Prevention , 2016 . 16 ( 3 ): 467 - 481 . DOI: 10.1007/s11668-016-0113-2 http://doi.org/10.1007/s11668-016-0113-2 .

Z X WENG , J L WANG , T SENTHIL , 等 . Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing . Materials & Design , 2016 . 102 276 - 283 . http://www.sciencedirect.com/science/article/pii/S0264127516305196 http://www.sciencedirect.com/science/article/pii/S0264127516305196 .

F X CHEN , X CHEN , X XIE , 等 . Full-field 3D measurement using multi-camera digital image correlation system . Optics and Lasers in Engineering , 2013 . 51 ( 9 ): 1044 - 1052 . DOI: 10.1016/j.optlaseng.2013.03.001 http://doi.org/10.1016/j.optlaseng.2013.03.001 .

潘兵 , 谢惠民 , 续伯钦 , 等 . 数字图像相关中的亚像素位移定位算法进展 . 力学进展 , 2005 . 35 ( 3 ): 345 - 352 . DOI: 10.3321/j.issn:1000-0992.2005.03.005 http://doi.org/10.3321/j.issn:1000-0992.2005.03.005 .

B PAN , H M XIE , B Q XU , 等 . Development of sub-pixel displacements registration algorithms in digital image correlation . Advances in Mechanics , 2005 . 35 ( 3 ): 345 - 352 . DOI: 10.3321/j.issn:1000-0992.2005.03.005 http://doi.org/10.3321/j.issn:1000-0992.2005.03.005 .

F HILD , S ROUX . Digital image correlation: from displacement measurement to identification of elastic properties-a review . Strain , 2006 . 42 ( 2 ): 69 - 80 . DOI: 10.1111/j.1475-1305.2006.00258.x http://doi.org/10.1111/j.1475-1305.2006.00258.x .

刘聪 , 戴云彤 , 戴美玲 , 等 . 二维多相机全场数字图像相关变形测量方法 . 光学学报 , 2016 . 36 ( 12 ): 1212002 https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201612013.htm https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201612013.htm .

C LIU , Y T DAI , M L DAI , 等 . Deformation measurement by two-dimensional multi-camera full-field digital image correlation . Acta Optica Sinica , 2016 . 36 ( 12 ): 1212002 https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201612013.htm https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201612013.htm .

Views

333

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influence of the molecular structure of polyurethane acrylates on the morphology and properties of polymer dispersed liquid crystals

Preparation and properties of high-contrast colorful polymer- dispersed liquid crystals based on epoxy-thiol

Related Author

Yi-chen ZHONG

Fan-xiu CHEN

Xin-ya GAO

Zhao-jun ZHANG

Wei-na ZHAO

Xiao-bin ZHOU

周晓宾

Bin ZHANG

Related Institution

School of Science， Qingdao University of Technology

Qingdao borrec 3D Manufacturing Co.， Ltd.

College of Chemistry and Chemical Engineering， Hefei University of Technology

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China 130033 Postal code：130033
Tel：0431-86176059 Email：yjxs@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰