the triode field emission display device was developed; the cathode faceplate
anode faceplate and packaging faceplate were respectively formed using the soda-lime glass materials. Used as the common part of connected emitting chamber and exhaust chamber
the anode faceplate was adopted to display the device image. The deformation phenomenon was avoided for the anode faceplate with high smoothness in the vacuum environment
and the lightening image possessed good display uniformity. There was no any electrode for the packaging faceplate. The whole packaging device fabrication process was stable
reliable and low-cost. The developed display device possessed high display brightness
better grid-controlled characteristics and image display performance.
关键词
Keywords
references
Matsuda T, Mesko M, Ogino A, et al. Synthesis of vertically aligned carbon nanotubes on submicron-sized dot-catalyst array using plasma CVD method
. Diamond and Related Materials, 2008, 17(4-5):772-775.
Ni L, Kuroda K,Zhou L P, et al. Decomposition of metal carbides as elementary step of carbon nanotube synthesis
. Carbon, 2009, 47(13):3054-3062.
Choi Y C, Lee N. Influence of length distributions of carbon nanotubes on their field emission uniformity in the paste-printed dot arrays
. Diamond and related materials, 2008, 17(3):270-275.
李玉魁,郭艳清,朱长纯.三极结构场致发射显示器的器件制作研究
. 液晶与显示, 2006,21(3):232-235.
Kwo J L,Yokoyama M,Wang W C, et al. Characteristics of flat panel display using carbon nanotubes as electron emitters
. Diamond and related materials, 2000, 9(3-6):1270-1274.
Zhang Z J, Sun Z, Chen Y W. Improve the field emission uniformity of carbon nanotubes treated by ball-milling process
. Appl. Surface Science, 2007, 253(6):3292-3297.
Zeng F G, Zhu C C, Liu W H, et al. The fabrication and operation of fully printed carbon nanotube field emission displays