Fabrication of Field Emission Backlight Unit for LCD

CHEN Xiu-yun; YE Yun; GUO Tai-liang

doi:null

您当前的位置：

首页 >

文章列表页 >

Fabrication of Field Emission Backlight Unit for LCD

Device Technology & Physics | 更新时间：2020-08-12

- Fabrication of Field Emission Backlight Unit for LCD
- Chinese Journal of Liquid Crystals and Displays Vol. 24, Issue 3, Pages: 399-403(2009)
- 作者机构：
  
  福州大学物理与信息工程学院,福建福州 350002,E-mail:yunxiuc@163.com
- 作者简介：
- 基金信息：
- DOI：
  CLC： TN383
- Received：20 October 2008，
  
  Revised：02 January 1900，
  
  Published Online：30 June 2009，
  
  Published：30 June 2009
- 稿件说明：
移动端阅览
陈秀云;叶芸;郭太良. 应用于液晶显示器的场发射背光源制备[J]. 液晶与显示, 2009,24(3): 399-403

CHEN Xiu-yun;YE Yun;GUO Tai-liang. Fabrication of Field Emission Backlight Unit for LCD[J]. 液晶与显示, 2009,24(3): 399-403
陈秀云;叶芸;郭太良. 应用于液晶显示器的场发射背光源制备[J]. 液晶与显示, 2009,24(3): 399-403 DOI：

CHEN Xiu-yun;YE Yun;GUO Tai-liang. Fabrication of Field Emission Backlight Unit for LCD[J]. 液晶与显示, 2009,24(3): 399-403 DOI：

摘要

对应用于LCD的不同于传统管状背光源的新型面状场发射背光源(FE-BLU)的制备技术进行了研究。将表面改性碳纳米管(CNTs)丝网印刷于金属Ag精细电极上形成碳纳米管阴极

利用透射电镜与扫描电镜表征了CNTs及阴极的表面形貌。采用有机溶剂高压气流法对阴极进行表面处理

并真空封装成25.4 cm(10 in )的CNTs FE-BLU器件。测试结果表明

表面处理后阴极场发射电流密度得到明显提高

器件亮度可达5 860 cd/m

均匀性为82%

持续发射35 h后

发射电流无明显衰减。

Abstract

The fabrication technology of a novel planar field emission backlight unit (FE-BLU)applied to LCD was introduced

which was different from the traditional tubular ones. The carbon nanotubes (CNTs) cathodes were prepared by screen-printing on elaborate Ag electrodes and sealed into a prototype of a 25.4 cm(10 in) FE-BLU after CNTs had been chemical modified. Then high pressure airflow with organic solvent was adopted to improve the properties of field emission. The morphology of CNT and cathodes were investigated by transmission electron microscope (TEM) and scanning electron microscope (SEM). The results showed that the field emission current density of CNT cathodes was raised evidently

and the fabricated prototype exhibited outstanding properties with high brightness of 5 860 cd/m

uniformity of 82% and without significant emission attenuation during 35 h .

关键词

Keywords

references

. Kwak M G, Han J I, Kim W K, et al. Mercury-free 18 inch flat fluorescent lamp with good uniformity [J]. J. Society for Information Display, 2002, 10(2):179-181.

. Blom S M P, Huck H P M, Cornelissen H J. Towards a polarized light-emitting backlight: micro-structured anisotropic layers . J. Society for Information Display, 2002, 10(3):209-213.

. 刘敬伟,王刚,马丽,等.大尺寸液晶电视用LED背光源的设计与制作 [J]. 液晶与显示, 2006,21(5):539-544.

. Talin A A, Dean K A, Jaskie J E. Field emission displays:A critical review [J]. Solid-State Electrics, 2001, 45:963-976 .

. Silva S R P, Carey J D,Chen G Y,et al. Nanoengineering of materials for field emission display technologies [J]. IEE. Proc. Circuits. Devices. Syst., 2004, 151 (5):489-496.

. Wang Qilong, Wang Jinchan, Di Yunsong, et al. Shadow mask field emission display with carbon nanotubes emitters [J]. Diamond and Related Materials, 2008, 17 (3):217-222.

. Choi W B, Chung D S, Park S H, et al.Late-news paper:A 4.5-in. fully sealed carbon nanotube-based field-emission flat-panel display [J]. SID Symposium Digest of Technical Papers, 1999, 30(1):1134-1137.

. Kim J M, Choi W B, Lee N S, et al. Field emission from carbon nanotubes for displays [J] .Diamond and Related Materials, 2000, 9(3-6):1184-1189.

. Shi Y S, Zhu C C, Wang Qikun, et al. Large area screen-printing cathode of CNT for FED [J]. Diamond and Related Materials, 2003, 12(9):1449-1452.

. Gu G, Philipp G, Wu X, et al. Growth of single-walled carbon nanotubes from microcontact-printed catalyst patterns on thin Si3N4 membranes [J]. Advanced Functional Materials, 2001, 11(4):295-298.

. Zhang Qiang, Huang Jia-Qi, Zhao Meng-Qiang, et al. Radial growth of vertically aligned carbon nanotube arrays from ethylene on ceramic spheres [J]. Carbon, 2008, 46(8):1152-1158.

. Zoltán Balogh, Gyula Halasi, Barbara Korbély, et al. CVD-synthesis of multiwall carbon nanotubes over potassium-doped supported catalysts [J]. Appl. Catalysis A:General, 2008, 344(1-2):191-197.

. 曾凡光,朱长纯,刘兴辉,等.用机械破碎方法提高印刷碳纳米管薄膜的场发射性能 [J]. 西安交通大学学报, 2005,39(8):863-865.

. Vin K T J, Gill Ies M, Kriege J C, et al. Enhanced field emission from printed carbon nanotubes by mechanical surface modification [J]. Appl. Phys. Lett., 2003, 83 (17):3552-3554.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research progress of carbon nanotube/liquid crystal composites

Rapid growth mechanism and field emission properties of ZnO nanowires

Fabrication and field emission properties of patterned ZnO arrays

Electron focused ZnO field emission backlight unit

Design of wide viewing angle liquid crystal display

Related Author

CHANG Chun-rui

AN Li-bao

GUO Xiao-zheng

Zhi YANG

Jian-ping LIN

Zhong-hua ZHENG

Yun YE

Qi XIN

Related Institution

College of Sciences， North China University of Science and Technology

College of Mechanical Engineering， North China University of Science and Technology

Concord University College Fujian Normal University

Key Laboratory of Functional Materials and Applications of Fujian Province, Xiamen University of Technology

Electronic Materials Research Laboratory, Xi'an Jiaotong University

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China 130033 Postal code：130033
Tel：0431-86176059 Email：yjxs@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰